Thermwood / eCabinet Systems

We also use them and we just install them manually ourselves. I've been thinking about placing holes, just haven't really looked into the measurements yet. It really shouldn't be too hard given they run from a fixed shelf below. Just thinking out loud, you might could make a hole pattern and associa...

Problem solved ! when I take it to presentation view, the wall is the right color. Just not in the detail room. I am using a soft beige, and in the detail room, it is green.

Justin, i tried changing to default after walls were built.


I also tried changing texture with paint roller(control)


maybe I'll reboot and try it !

what type of towel rod are you using?

I have build 4 and when i go to change the wall texture, I am having problems getting the wall to change. I have tried changing the default and selecting' change all to default'. And, I've tried just using the paint roller. On a separate note, when in the line drawing editor, I can't select the text...

I am starting another beaded face frame job. Being that the fixture for raised panel doors can hold stiles and rails, could it not also be programed to run a bead on the rails and stiles for the face frame? I'm thinking the notching or coping operation where the rails meet the stiles is something th...

Kerry, I have spent hours trying to make those 's' curve cuts on your front apron.
What's the trick?

I too am confounded by the arrow size on assemblies. Sombody help us !

When I use the leader line in the Line drawing editor, the line never appears but the text works like it normally does.
Does anyone know what might have caused this? It has worked within the last few weeks.

I happen to use the 'alternate source' method for costing doors and drawers fronts. One problem I have is that you have to use the same cost for drawer fronts as you do doors. It would be helpfull if we could have a separate cost feature for these two.

I've noticed several people are creating turned posts. How is that done? I'm presuming in the part editor with either a display cube or large board stock. But how do you get around the item so that it is round?

If I understand your question, You have 2 cabinets on each side of a 45 degree(135) inside corner. Pull out your scientific calculator(under the view command, in your windows calculator in your computer). Each cabinet is at 22.5 degreees,....so enter 22.5 in the caculator. then hit the tan button ti...

I've wasted at least 8 or 10 sheets of material(and the fee my machine owner charges me to cut ). Sometime it messes up the right and sometimes the left, however it gets the back everytime it messes up. I've talked to several phone techs and I'm always told this is a problem they didn't know about, ...

I am getting the installation source is not available also.

Also it says verify that the source exists and you can access it.


Can somebody help a fellow ecabber ?

Mine is freezing up alot lately when I'm in the cabinet editor. Hopefully, we'll get the next build soon.