Thanks Brad, I missed that one. Always good to learn something new!
Much appreciated,
jnr
Search found 831 matches
- Wed, Mar 26 2014, 12:43PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Group Parts - Drawers - Assembly
- Replies: 4
- Views: 9519
- Tue, Mar 25 2014, 3:06PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Group Parts - Drawers - Assembly
- Replies: 4
- Views: 9519
Re: Group Parts - Drawers - Assembly
Unfortunately, ecabinets does not support grain matching over multiple cabinets.
You may have to draw those drawer fronts in a .dxf file and nest it manually.
jnr
You may have to draw those drawer fronts in a .dxf file and nest it manually.
jnr
- Thu, Feb 20 2014, 11:23AM
- Forum: eCabinet Systems Software
- Topic: New Pocket Screw Joinery
- Replies: 16
- Views: 26174
Re: New Pocket Screw Joinery
Let me know how you like it once you've tried it out Chris
jnr
jnr
- Fri, Jan 17 2014, 10:57AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Is there a way to estimate cut time for a job?
- Replies: 4
- Views: 7920
Re: Is there a way to estimate cut time for a job?
John,
I'm sure it's not as quick as you'd like, but you could always program one sheet and run it in the air to get an exact time. If there were enough of them, that's what I'd do to be sure.
jnr
I'm sure it's not as quick as you'd like, but you could always program one sheet and run it in the air to get an exact time. If there were enough of them, that's what I'd do to be sure.
jnr
- Thu, Jan 16 2014, 4:35PM
- Forum: eCabinet Systems Software
- Topic: Looking for a Machine Owner in my region
- Replies: 2
- Views: 3677
Re: Looking for a Machine Owner in my region
Hi Chris,
Please feel free to give us a call, we are exclusively a CNC machining operation. I'd welcome the opportunity to quote your repetitive work, and we can easily ship it to VA.
Thanks,
Josh Rayburn
1.203.653.2281
Please feel free to give us a call, we are exclusively a CNC machining operation. I'd welcome the opportunity to quote your repetitive work, and we can easily ship it to VA.
Thanks,
Josh Rayburn
1.203.653.2281
- Wed, Jan 15 2014, 6:59AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Help with machine settings back up
- Replies: 4
- Views: 5154
Re: Help with machine settings back up
Thermwood has a utility for gathering machine information, I don't remember what it's called. I have an older version - so I would recommend emailing the support crew and requesting their updated version or whatever might be appropriate for your particular machine.
Hope that helps!
jnr
Hope that helps!
jnr
- Tue, Jan 14 2014, 11:47AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Help with machine settings back up
- Replies: 4
- Views: 5154
Re: Help with machine settings back up
Hi Scott, At home I use cloning software that makes a bootable clone of the whole drive on a SD card (and also on a second internal hard drive). If the main drive fails, I could boot from the SD card or the internal drive, with no lost time. My wife's HD recently failed and being able to boot from t...
- Wed, Oct 30 2013, 6:52AM
- Forum: eCabinet Systems Software
- Topic: how to dado all the primeter edges of a board
- Replies: 10
- Views: 13063
Re: how to dado all the primeter edges of a board
May,
You will not be able to shorten the dado operation. We have no control over this.
Sorry I'm sure that's not too helpful -
jnr
You will not be able to shorten the dado operation. We have no control over this.
Sorry I'm sure that's not too helpful -
jnr
- Fri, Oct 25 2013, 12:02PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Hinge Hole
- Replies: 3
- Views: 4932
Re: Hinge Hole
The interpolate setting should be no more than tool diameter x3 if you want to clean the whole bottom of the hole. If CN does not find a tool to "interpolate" the drill operation, then it will automatically turn that operation into a pocket, and it will use the tools which are checked for ...
- Fri, Oct 25 2013, 11:26AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Hinge Hole
- Replies: 3
- Views: 4932
Re: Hinge Hole
Interpolate max diameter
jnr
jnr
- Thu, Oct 24 2013, 6:49AM
- Forum: eCabinet Systems Software
- Topic: The old favourite Hoop Errors
- Replies: 5
- Views: 6314
Re: The old favourite Hoop Errors
Neville, Generally the first message you saw results from lost cabinet bodies. Why that happens is anyone's guess, but if you take each cabinet into the cabinet editor, select the cabinet, and right click, choose 'remove all part editor cuts' 'from entire cabinet' then let it rebuild - you should be...
- Wed, Oct 16 2013, 7:40AM
- Forum: eCabinet Systems Software
- Topic: how to dado all the primeter edges of a board
- Replies: 10
- Views: 13063
- Tue, Oct 15 2013, 3:41PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Bar code labels
- Replies: 6
- Views: 7916
Re: Bar code labels
What version of control nesting are you running?
- Tue, Oct 15 2013, 7:40AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Bar code labels
- Replies: 6
- Views: 7916
Re: Bar code labels
Dave, I missed your note about off-fall, sorry. I thought you were talking about re-cutting a part that had been damaged.
Have you turned off the off-fall cuts? If so, the labels will not be printed for off-fall pieces.
jnr
Have you turned off the off-fall cuts? If so, the labels will not be printed for off-fall pieces.
jnr
- Mon, Oct 14 2013, 10:10AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Bar code labels
- Replies: 6
- Views: 7916
Re: Bar code labels
Dave, you can modify the label report file with Crystal Reports if you wish, or perhaps hire someone who has CR to do it for you.
jnr
jnr