Thermwood / eCabinet Systems

Cad/cam

Do not change thickness on existing materials. You will have many problems with doing this. Add a new material with average thickness then change sheet stock at room or batch level. Some members have found it prudent to create complete libraries in certain materials such as 3/4\" melamine or 3/...

David,

I had this happening on some oddball cabs and found that going back to the main editor before adding the doors has helped the problem.

Hope this helps,
Forrest

Ray,

This was a bug in 5.1.2 and was supposed to be fixed in some situations. However it was only documented a time or two. Scott Vaal will need to respond to this.

Forrest

Mark T, I'm having an issue similar to yours. This occured about 3 months ago as well after an update. I'm running 5.27 now. Whats really interesting is that I ran 3 sets of drawers with no problems. Then nested a set this morning out of different material and got the issue of cut thru to deep. Give...

Walker, I believe you have misunderstood the comment. Micheal is refering to the drawer front. Most every shop keeps there top drawer the same hieght from desk to raise bar cabs. If the doors and drawers recognized stretchers like they do faceframes this wouldn't be an issue. We also need to be able...

Leo,


I had this same thing along with other edited FFs happen on a Vista machine. Are you on Vista?

Forrest

Nick,

I had the same problem with loading on a new computer this morning. It hung up when asking for updates so I went onto this site and ran the update 5.1.2. The program opened no problem then.

Forrest

Mike,

I've never been able to change reveals on the doors after adding them and get consistant results. Something is always skewd. You will have to change the defaults and then add the doors.

Forrest

Ken,

I'm having similiar issues with vista on my laptop. I did get it removed but it stuck for an hour before resuming. I've tried to reload in the recomended fashion and am still having problems. At this point I'm going to put XP on the machine.

Forrest

Mark,

I had this happen a while back and only had to defrag.

Forrest

I have to respond to this also. We've run our machine average 4 to 5 hours a day for over 4 years and still use the same collets. I'm not quite sure I understand what is going to happen other than maybe I lose a tool. I can understand if you are getting chatter or some other poor quality cut but thi...

Tim,

Registration codes cannot be shared and can only come from Thermwood. If your email address has changed recently maybe they don't have the new one.

Forrest

Scott, I have to close down everytime. I tried just going to batch then back (still there). Tried going into batch and loading a cab then going to nest. The ghost cab shows in nest screen as well. Justin at Thermwood told me to update my graphics card. I'm doing that now. Will report back. Forrest

Scot,

I have already passed this along to the programmers but one other thing that I've noticed is that the cab actually does save with changes but when you try to delete and load new cab the old will not dissapear. Is this happening to you as well?

Forrest