Thermwood / eCabinet Systems

Everything is fine. There is actually an update coming that will extend the time.

Hi Bill
I use Carbonite.com for backup. It's $56/year and all files in all directories are backed up in real time. In addition, you can remotely access any file or folders from any computer connected to the Internet. Check it out.

Try cutlistplus.com
You can import the excel file in CSV format and create cut sheets, etc

Is there any way to export Buy List into Excel?

The Thermwood bits come with instructions and suggested settings.
The straight bit is specified in CN settings. Typically a 1/4" set for dovetail.

There are 3 bits avail/ at the following for 1/2", 5/8 & 3/4" stock;
http://www.woodworkerswholesale.com/Sea ... h=dovetail

You might consider a deep throat micrometer like the following. You can measure into board by 6" from the edge with great accuracy.


http://www.ebay.com/itm/Starrett-Deep-T ... 27bd8e40ac

Kerry,
Curious, why do you trom 3 edges?

Sorry Kerry. My ????? was to help "Bump" the topic to the top.
We can call this topic bump "Occupy Thermwood"

Just want to give a shout-out to Mike in support. Although it cost me $1,200 for a new Seimens spindle control module, I had minimal downtime. Mike diagnosed the problem quickly, overnighted the new part, I was guided through installing the new controller this morning (thanks Carl). Total downtime w...

??????

I have a 61x121 table and need to replace the Table Board. Is there a special MDF used for Table Boards? Also, does anybody seal the edges to achieve greater vacuum?

Yes, you will need to install eCabs on your controller. QuickCut works with your eCabs libraries.

This is a 19 5/8" x 30 1/16" x 1/4" decorative grille.

Hi Ray:
The sheets are flipped on the Y axis. The option to trim the sheet just at the pin locations works great.