Search found 774 matches

by Scott Marshburn
Thu, Feb 11 2021, 6:16PM
Forum: eCabinet Systems Software
Topic: CNC controller crashing
Replies: 5
Views: 6213

Re: CNC controller crashing

Hi Andrew. Can you post the ecab file as well as the dxf file so we can hav a look?
by Scott Marshburn
Thu, Aug 13 2020, 2:40PM
Forum: eCabinet Systems Software
Topic: Toe Kick Notch On Finished End
Replies: 2
Views: 5239

Re: Toe Kick Notch On Finished End

Hi John, Using the Fx editor for the bottom inset on the deck you should be able to set the bottom inset for the deck to be the bottom rail width-the deck thickness. This will make the toe kick notch flush with the bottom of the bottom rail.
by Scott Marshburn
Mon, Aug 10 2020, 2:25PM
Forum: eCabinet Systems Software
Topic: constraint manager
Replies: 3
Views: 5405

Re: constraint manager

Sean O' Hare wrote:Hi Scott,

thank you, that worked perfectly.

Sean
You are welcome, Sean. Glad it helped.
by Scott Marshburn
Mon, Aug 10 2020, 7:46AM
Forum: eCabinet Systems Software
Topic: constraint manager
Replies: 3
Views: 5405

Re: constraint manager

Hi Sean here is a link to a video that I did on creating a 1 piece flat panel door https://youtu.be/LS97b0r1jEI?list=PLsaj ... U0e2&t=805
This link should start the video at the section where I show how to add the constraints for a 2-panel door.
by Scott Marshburn
Sat, Aug 08 2020, 8:13AM
Forum: eCabinet Systems Software
Topic: Drawer front adding slide holes?
Replies: 2
Views: 4900

Re: Drawer front adding slide holes?

Hi Ron. The cabinet that you posted has a default drawer slide and hole pattern associated to it. you can clear the default slide and hole pattern by selecting drawer slides from the right pop out menu. Here you can clear the default slide or hole pattern by clicking the drop-down arrow for the draw...
by Scott Marshburn
Sat, Jul 18 2020, 12:32PM
Forum: eCabinet Systems Software
Topic: new to Ecab needs help get training
Replies: 4
Views: 6183

Re: new to Ecab needs help get training

I agree with Mark about using dadoes and screws. You might also consider lock dadoes and pocket screws. I think that fast cap carries plugs\covers for pocket screws if the pockets being visible on the inside of the cabinets is an issue.
by Scott Marshburn
Fri, Jul 17 2020, 7:11PM
Forum: eCabinet Systems Software
Topic: new to Ecab needs help get training
Replies: 4
Views: 6183

Re: new to Ecab needs help get training

Hi Gary, If you have not already you might want to have a look at there online training videos.
by Scott Marshburn
Tue, Jul 07 2020, 6:43AM
Forum: eCabinet Systems Software
Topic: Can't get top of door in corner cab to get to top
Replies: 2
Views: 4629

Re: Can't get top of door in corner cab to get to top

Hi Leo. I was able to get the door to adjust on my end by deleting the door and adding it back without making any changes to the settings that were applied to the cabinet that you posted.
by Scott Marshburn
Wed, Jul 01 2020, 8:36AM
Forum: eCabinet Systems Software
Topic: Make a MDF door with a flat "raise"
Replies: 5
Views: 6960

Re: Make a MDF door with a flat "raise"

Hi Stuart. here is a link to a video on how I go about drawing a 1 piece flat panel mdf door. https://www.youtube.com/watch?v=LS97b0r ... dex=2&t=0s
by Scott Marshburn
Tue, Jun 30 2020, 7:01AM
Forum: eCabinet Systems Software
Topic: Changing preset values in 5-piece door construction
Replies: 2
Views: 4451

Re: Changing preset values in 5-piece door construction

Hi Donald. You can do this in settings and preferences. Click on Default 5 Piece Door Details for Cut List. This opens a dialogue that will enable you to establish default settings for five-piece doors. The settings entered here will only be used if the door or drawer front did not get a detail sett...
by Scott Marshburn
Sun, Jun 07 2020, 5:23PM
Forum: eCabinet Systems Software
Topic: No picture of cab
Replies: 5
Views: 6203

Re: No picture of cab

Hey Marvin. The first thing that I would try is to run the repair option. Close ecabinents then In the control panel select programs, select programs, and features then. select ecabinet systems 6.2.6, click the repair option. after it has finished open ecabinents and see if this fixed the problem. I...
by Scott Marshburn
Fri, May 08 2020, 3:22PM
Forum: eCabinet Systems Software
Topic: Angle part
Replies: 3
Views: 5861

Re: Angle part

Hi Rob. Can you post the assembly that you are working with? I may be able to help you with this.
by Scott Marshburn
Wed, Apr 08 2020, 6:34AM
Forum: Thermwood 3-Axis Machinery
Topic: Profile modeler
Replies: 2
Views: 5406

Re: Profile modeler

Yes, you can.
by Scott Marshburn
Sat, Mar 28 2020, 6:45PM
Forum: Lounge
Topic: What methods do you use to hold down small parts?
Replies: 5
Views: 15096

What methods do you use to hold down small parts?

I am curious to know what methods our members use to hold down small parts that will move even with a vacuum table. I recently came across this video from a subscriber Mark Lindsay CNC. Pretty sweet trick. https://www.youtube.com/embed/3uTsQ3dYRrk?fbclid=IwAR1hLR4mNA_n9Rhb0-u-JEL7KCKgptYkUhTf7HvLTqA...
by Scott Marshburn
Mon, Feb 24 2020, 5:30PM
Forum: eCabinet Systems Software
Topic: Feature Change Request
Replies: 5
Views: 7722

Re: Feature Change Request

Donald. What version of excel are you running? If you are running 2016 or higher or are running 2010,2013 and have the power query add-in installed this can be done easily without any VBA code. If you would like to contact me I will be glad to help you with this.
Scott.