Search found 436 matches
- Tue, Apr 05 2011, 9:35AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Need to cut 96" length on CS41-48
- Replies: 7
- Views: 5700
Re: Need to cut 96" length on CS41-48
Ryan, Jeremy should perhaps confirm this but... As I mentioned earlier, I believe that Jeremy's issue is that he cannot cut a part that has a finished length of 96". So, if he has a refrigerator end panel or other part that is EXACTLY 96" long - he is finding that he unable to cut it on hi...
- Mon, Apr 04 2011, 1:05PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Need to cut 96" length on CS41-48
- Replies: 7
- Views: 5700
Re: Need to cut 96" length on CS41-48
Ryan - I believe that Jeremy's issue is that he cannot cut a part that has a finished length of 96". Jeremy - My memory may be failing me but with the CS41, I believe that there are limits that are exactly 48" in the Y and 96" in the X . Not sure if there is any "extra" in t...
- Wed, Mar 30 2011, 11:16PM
- Forum: Thermwood 3-Axis Machinery
- Topic: CNC Cutting Out of Square
- Replies: 2
- Views: 3248
Re: CNC Cutting Out of Square
Sounds like your gantry could be out of square. Have you had any crashes lately that could have knocked one side/leg?
You may want to contact Thermwood's technical services to see how to go about checking the gantry for squareness.
You may want to contact Thermwood's technical services to see how to go about checking the gantry for squareness.
- Tue, Mar 22 2011, 7:57AM
- Forum: eCabinet Systems Software
- Topic: Dado Width Off?
- Replies: 9
- Views: 7081
Re: Dado Width Off?
Darrel, 1) How much bigger/wider is the dado? 2) If you put calipers to your material, what is the actual thickness in decimal format? 3) Are you cutting CLIMB or CONVENTIONAL? 4) Can you describe the 1/2" tool? Geometry: Up-shear, Down-Shear, Compression, Straight? # of flutes? Overall cut len...
- Mon, Mar 21 2011, 8:03AM
- Forum: eCabinet Systems Software
- Topic: angled corner cab
- Replies: 4
- Views: 3946
Re: angled corner cab
Brian, So just in case, following on Rick's post - If you want these left and right ends to actually be 11 3/4" right off the router, you need to first adjust the left and right depths to (11.75-0.75) 11.000". As Rick stated, eCab will then automatically add the material thickness to the c...
- Fri, Mar 18 2011, 1:04PM
- Forum: eCabinet Systems Software
- Topic: Ecab deleting cabinets from job
- Replies: 9
- Views: 10771
Re: Ecab deleting cabinets from job
Gentlemen, You almost have it... I have the same problem... Is there someone at Thermwood that can solve the problem? Jocelyne is a CNC Automation client (has a couple of 53s and uses Panelmetrix along with eCabinet Systems). Aaron is also a CNC Automation client from British Columbia. We could chal...
- Wed, Mar 16 2011, 12:43PM
- Forum: eCabinet Systems Software
- Topic: Errors changing default doors/doors in V6
- Replies: 6
- Views: 6042
Re: Errors changing default doors/doors in V6
Was this ever resolved? We have a client with the very same message.
Any help would be appreciated.
Any help would be appreciated.
- Tue, Dec 14 2010, 12:01PM
- Forum: eCabinet Systems Software
- Topic: New error message. Can't continue.
- Replies: 17
- Views: 11894
Re: New error message. Can't continue.
Hey Marc...
Iqaluit, Nunavut is a fair distance from Pembroke, Ontario! (About 2100 km or 1300 miles) Hope you brought your parka!
Have a safe trip home.
Iqaluit, Nunavut is a fair distance from Pembroke, Ontario! (About 2100 km or 1300 miles) Hope you brought your parka!
Have a safe trip home.
Re: 10 years!
Congratulations Thom!
- Tue, Nov 30 2010, 9:28AM
- Forum: eCabinet Systems Software
- Topic: Download 110MB for a time update?
- Replies: 2
- Views: 3488
Re: Download 110MB for a time update?
Jason, I am sure that it is because the "update" is also a "complete install" for those that are setting up a new workstation. It was perhaps thought best not to confuse things with a small "patch", especially in todays "high speed" internet world where a 110 ...
- Thu, Nov 25 2010, 9:51AM
- Forum: eCabinet Systems Software
- Topic: Expire in 6 days
- Replies: 2
- Views: 4349
Re: Expire in 6 days
Dan, Thermwood has already responded to similar inquiries. I would guess that the eCabinet Systems development team had assumed that they would have had either 6.0 Build 6 out by now or perhaps a 6.1 (or similar). According to a post by Larry Epplin: We will release a time extension version next wee...
- Wed, Sep 15 2010, 10:51AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Load screen running slowly.
- Replies: 2
- Views: 2718
Re: Load screen running slowly.
Sean... Are you using the RECUT feature? If you are not, you may want to try the following: 1. Go into SETTINGS and set the RECUT HISTORY DAYS to 0 (zero). 2. Close THM.EXE. 3. Delete both " history.mdb " and " history_save.mdb " in the c:\Rolling Nest\ directory. (Do NOT delete ...
- Sun, Sep 12 2010, 9:07AM
- Forum: Thermwood 3-Axis Machinery
- Topic: barb bit and joint
- Replies: 25
- Views: 18197
Re: barb bit and joint
Ray,
What type of material were you cutting? Plywood, MDF or particle board?
What type of material were you cutting? Plywood, MDF or particle board?
- Wed, Sep 08 2010, 8:02AM
- Forum: Thermwood 3-Axis Machinery
- Topic: barb bit and joint
- Replies: 25
- Views: 18197
Re: barb bit and joint
The Control Nesting 5.59 Update mentions that:
Does this mean that the Barbed Dado feature will not be usable until the next build is released?
- Barbed tool option implemented. Barbed Dado is an option with eCabinet Systems Version 6.0 Build 5.
- Thu, Aug 26 2010, 8:57AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Cutting aluminum sheet
- Replies: 6
- Views: 6586
Re: Cutting aluminum sheet
As an alternative to liquid coolant, some of our clients have had success by using a combination of an "air chiller nozzle" directed at the too/cutting area and and special tooling that was dipped in a kind of non/low stick coating. The "air chiller noozle" was similar to these: ...