Thermwood / eCabinet Systems

Chris Armstrong wrote:Thats fine i can see on his version of excel there are tabs to choose from, on my version there isnt any tabs so i cant go to sheet components as he is instruction to do.

Chris,
I have found if I save my file first then open it the tabs are there.
Tim

Scott, yes

I loaded a room selected a display item clicked file, export and it crashed.
sent error report

Tim

Yes, just add your board stock to the sheet goods listing, ie you have a board 8" wide by 96" long and 5/8" thick and your drawer parts are maybe 5" wide by 20" long it will nest them on that size sheet (board) - sometimes I glue up a panel 24" wide and 30" long by...

Seems to be a problem with pocket holes with the "Pocket Setting" in the link set to "Spiral" unless you set it with the "Outside-In Cut" checked, then it works just right

Thanks
Rick

Just cut a cabinet using the Shopbot link and the pocket holes are out of shape they should be round holes created in part editor
Thanks
Tim

Are you familiar with the offset in part editor ?

Thanks Scott, I first added the partition at 3/4" inset then adjusted the partition to 1.5" inset, added the fixed shelves on the left then the right, when I seen the little gap I assumed it was caused by the 3/8" dado depth that when I added the right side the two hit. I don't know i...

Yes sir,

I get asked to make some strange stuff, like this, a tool chest for gun tools. I am needing to add small drawers but the shelves and partition are recessed and when I select the area I can not select just one area for one drawer. How can I select just one area? The bottom drawers select correctly, I...

As far as I have seen, No, unless you take the parts in and add the cuts manually in part editor

Forrest Chapman wrote:Tim, until then you can make a RTA hole pattern that is just a slot and apply it. It will cut it as a dado.

Forrest

I will have to give that a try

Thanks
Tim

Scott G Vaal wrote:

tim lucas wrote:Thanks Scott, maybe someday

Tim,

I will certainly add it to the wish list for you.

Awesome!

Thanks again

Thanks Scott, maybe someday

Scott,

Can the Shopbot link cut the pockets for the pocket screws?

Thanks Scott, that will work