Thermwood / eCabinet Systems

I would also like to be able to rotate the part in parts editor. Sometimes depending on the layout its frustrating not to be able to use the rectagle mode to quickly cut out a sink Hole in a counter when the counter loads at a angle. Mabe its just me but I tried to find a way to rotate but no go.

I was having that problem recently bigtime but I Fixed it by going to Line Drawing editor and cleaning up & Deleting not needed drawings that I was using for checking dimensions etc. I guess my pc could not handle saving all that extra data. I have not had this problem re-occur since I have been...

I Just discovered that if you re-size the cabinet by using adjust cabinet features/resize after the cabinet is in custom layout instead of resizing as you install it the Doors do Not become transparent ...

This has been happening to me also. I have created a library with One Piece MDF Shaker doors. I Used Slab doors with 0 thickness edgebanding, Cut a pocket in the door using parts editor while the cabinet was in cabinet editor, Then using constraint manager constrained the pockets. Then Saved the Cab...

Rob a one piece shaker style is not something I would make. It is more efficient and less messy to make a one piece frame and drop in a centre panel. We design a frame with rebate in CAD and them machine it on the CS40 as well as a centre panel in a thinner material which can be loaded as a panel j...

Brian, I did the same after reading joes post as well. Saved it as a assembly and put it on the Custom layout. Everything was going well until I realized the Doors Did not show up on custom layout although when I went to Cutlist they were there :? Changing them all in the Library or by editing each ...

I Tried Closing E-Cabinets & Re-opening the job and It seemed to fix the problem .. I Guess I should have tried that before posting ...

I've been trying to edit a cabinet but when I take the cabinet to cabinet editor & go to shelf editor I can not see the shelves becouse the doors are still there. This is happening if I go to Edit strecher or drawer etc. If I hide them manually one by one they come back soon as I click on a shel...

How do you cut a pocket in a Slab MDF Door? I am unable to get the slab door into parts editor to cut a pocket. It seems odd to me that a Shaker One piece MDF door cannot be done in Door Editor. I do this type of door a lot and and need to be able to use Change Doors Feature to access this type of d...

I Can't seem to figure out how to design a One piece Shaker MDF Door. It seems only a innner profile can be done. Anyone done this. I'm not using a router yet.

Well I think I've discovered one reason why I'm getting a Out of memory message constantly. I went to Line drawing editor & Deleted all the pages that were not needed ( Pages I used to Check Dimensions etc. ) There was about 18 of them. I reduced it down to 3. Suddenly I have no problem saving a...

Thanks guys for your responses I've managed to do a small amount of work with the file I'm having trouble with. I had to adjust the cabinet size in Cabinet Editor and save before bringing it into the room. Usually it would take me a few trys each time to get it to save.... Very Very time consuming.....

AAAARRRRGGG !!! I've started using E-Cabinets recently and have designed a couple projects so far. I upgraded my ram to 1 Gig & put in a Nividia GEForce 7300 Vid Card With 256 Ram. I thought everything was good until it try to make some changes in one project and try to save and the screen goes ...