Search found 179 matches
- Tue, May 20 2008, 5:41PM
- Forum: eCabinet Systems Software
- Topic: Image loss on board stock material
- Replies: 5
- Views: 4927
Re: Image loss on board stock material
I have also had this happen, I usually just delete the offending part and redo it and everything is fine. Its only happened 2 or 3 times and it was before 5.2 was installed.
- Fri, Apr 25 2008, 9:26AM
- Forum: eCabinet Systems Software
- Topic: Backing up
- Replies: 7
- Views: 5146
Re: Backing up
Yes that is what I mean Dan, what, where and how do I back up the files on the Supercontrol.
- Thu, Apr 24 2008, 3:59PM
- Forum: eCabinet Systems Software
- Topic: Backing up
- Replies: 7
- Views: 5146
Backing up
We bought an External harddrive for backing up Ecabs and other files, what files on the Thermwood (CS45-510) should be backed up?
- Thu, Apr 24 2008, 3:08PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Vacuum Pump
- Replies: 7
- Views: 5382
Vacuum Pump
Can the exhaust outlet on our 18hp Becker pump be unbolted and rotated 180 degrees so that it blows out our garage door instead of into our shop. There is 4 bolts on top and it looks like it can be done but we don't want to void any warranty. In the winter its bonus heat but now its too warm to blow...
- Mon, Apr 21 2008, 8:25AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Vortex Bits.
- Replies: 2
- Views: 2390
Re: Vortex Bits.
Thank you Sir!
- Mon, Apr 21 2008, 7:07AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Vortex Bits.
- Replies: 2
- Views: 2390
Vortex Bits.
We are close to using up the Vortex 3184 bits that we have and I wanted to order more bot I cannot find them on Woodworkers Wholesale website has this number been replaced?
- Mon, Apr 14 2008, 2:23PM
- Forum: eCabinet Systems Software
- Topic: Cutout Problem
- Replies: 1
- Views: 1931
Cutout Problem
We are building the attached kiosk that has two panels cutout. The front one is a display panel that is just a bezel surrounding a touch screen and the one behind it is what the screen bolts and vents through. The problem is control nesting whats to turn the front panel to dust instead of just routi...
- Wed, Apr 09 2008, 8:41AM
- Forum: eCabinet Systems Software
- Topic: Dado-tenon quirk?
- Replies: 13
- Views: 7608
Re: Dado-tenon quirk?
Thanks Justin, we figured out yesterdays problem, we used the select sheet option in control nesting so we could stop the job if need be,and we did because we ran out of board. When we first started the job we scanned in 2 pieces of off fall and something we were never told was if you do this when y...
- Tue, Apr 08 2008, 3:36PM
- Forum: eCabinet Systems Software
- Topic: Dado-tenon quirk?
- Replies: 13
- Views: 7608
Re: Dado-tenon quirk?
Wow, thats alot of settings, the 4 wall cabinets in the esj. file I sent you all started out as a 30 x 30 x 12 wall cabinet. All that I did was change the heights, widths and added another door to the shorter one and made all the floors flush to the backs because they are not getting laminated it is...
- Tue, Apr 08 2008, 1:40PM
- Forum: eCabinet Systems Software
- Topic: Dado-tenon quirk?
- Replies: 13
- Views: 7608
Re: Dado-tenon quirk?
Most of our jobs are commercial so we don't need to draw any room layouts or presentation views, so what I have been doing is starting with a seed cabinet and making my changes. Then I will also load in what ever other cabinets I need and make changes to them, when I'm done I save the job as an asse...
- Tue, Apr 08 2008, 10:20AM
- Forum: eCabinet Systems Software
- Topic: Dado-tenon quirk?
- Replies: 13
- Views: 7608
Re: Dado-tenon quirk?
Version 5.38
- Mon, Apr 07 2008, 9:38AM
- Forum: eCabinet Systems Software
- Topic: Dado-tenon quirk?
- Replies: 13
- Views: 7608
Re: Dado-tenon quirk?
Wall cabinets only...
- Mon, Apr 07 2008, 8:51AM
- Forum: eCabinet Systems Software
- Topic: Dado-tenon quirk?
- Replies: 13
- Views: 7608
Re: Dado-tenon quirk?
Here are the requested files.
- Fri, Apr 04 2008, 4:08PM
- Forum: eCabinet Systems Software
- Topic: Dado-tenon quirk?
- Replies: 13
- Views: 7608
Dado-tenon quirk?
When I bring a cabinet into an assembly and resize it the tenons are coming out exactly the same size as the dado and the parts will not fit together, I have attached a photo.
- Mon, Mar 31 2008, 12:35PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Nesting update?
- Replies: 7
- Views: 4849
Re: Nesting update?
Disregard the last post we got it to open on a different computer and I am sending the files to Dan Lopez now.