Thermwood / eCabinet Systems

Hi Mohan, Here's a method you can use to add shelf pin holes to parts that wouldn't normally have them. Start by developing a cabinet with adjustable shelves with the hole size and spacing the way you want. Hilite the part(side) and take it to the Part Editor. From there take it to the Contour Edit...

Kerry Fullington wrote:Mohan,

Is this what you are trying to do?

Clipboard02.jpg

Clipboard03.jpg

Clipboard04.jpg

yes kerry exactly this is what i need can u upload the design so that i can compare it with the one what i have done

While there is not an array or translate function in eCabinets, the Move option provides a similar capabilities since it will copy an entity or entities along with the "move". A method that may make using this feature faster to use is to create a line from the center of the hole that is t...

Mohan, Do you mean something like this? thanks Rick this is the design what i need, but still i cannot use it as i need angular faces on strecher and back when u use a strecther it dosent allow u to choose angular part or either i cannot cut a shape it it as i cannot bring it in to part editor but ...

Hi all did any one of ecabinet software users faced this problem as we are trying to put the shelf holes manually due to some reason (i know that shelf editor can put holes automatically )but when i do this i need to enter each and every hole coordinates and when i try to copy it can translate only ...

hi all thanks for ur replys but still i feel no one has got the way what i need, some of u told to put the cabinet in front home view still iam alright with all of them but cannot get what i want. let us use top bottom back deck strecher irrespective of name or view, what i want is shelf parallel to...

iam trying to design a vertical top opened bins with a adjustable shelf in it and ending up with problems can any one look at these file and give me a quick solution the problems are cannot put adjustable shelf in the place where i need(i want the adjustable shelf parallel to the back) shelf holes c...

Hi, Does anyone know of any cabinet shops in Western Australia willing to machine and edgeband my componants for me?. Or is there a thermwood branch in WA. that could possibly help. hi john u can contact us at ADP STORE FIXTURES 182-184 ABERNETHY ROAD BELMONT-6104 WA 08-93331333 CONTACT PERSON: ANT...

This is something that we have on our list of things that we plan to implement in control nesting, however we do not currently have a time set in which we will actually implement this type of feature. The only way that users can currently utilize the space left over is by manually nesting in a dxf ...

hi all iam trying to cut 500x500 square with 400x400 pocket and 300x300 square with 100x100 pocket in it. every thing is fine but if u see the layout it is nested seperately why cant the CN5.48 put the small square in the big square pocket did anybody try this or had an issue on this type of job whe...

Mohan, You may want to refer to this thread - Printing Labels If you only need barcodes for FLIP PARTS and OFF FALLS/CUTS then see the label report that I uploaded in this post - Re: Printing Labels - Off-Falls Only Updated Hope this helps... hi Brad McIntosh thanks it has solved my problem

i was looking for printing the barcodes yesterday and coudnt find the option in CN 5.48,but iam sure i have used this print barcodes only option previous version of CN
pls advice what to do as we need to print 1080 labels just for nothing but the sake of barcodes of flip operation

craig huzway wrote:i run the spoil board through the edge bander with pvc edging.
lots of vacuum loss there too.

yes edgebanding the spoilboard has improved the vaccum effect even we are doing it on our machine

Thought I would relate the following for the edification of operators. A few days ago I was machining some MDF using a brand new R900.00 triple flute 1/2" Onsrud compression cutter. Because it was 32mm board I set my max step to 10mm and off we went. not far into the cut the machine started gr...

Larry/Mohan, I figured this out. After studying the manual with the logic of the new settings.... I only had 1/2" tool setup for pocket with that material. The default "Minimum Pocket/Leftover Area" of new CN install is ".001^2" (I think that is right). Anyway it occurred t...