Search found 141 matches

by Roger Erismann
Thu, Mar 01 2007, 8:27AM
Forum: Thermwood 3-Axis Machinery
Topic: how do I cut this piece on the router?
Replies: 26
Views: 4407

I saved it as an assembly .esa? here it is again: I am not at work right now so I really don't know...I am a cabinet maker at a large company and when I'm given a job to fab (usually a drawing) I try to run as many parts through the router as possible without bogging down the drafting department... ...
by Roger Erismann
Thu, Mar 01 2007, 8:09AM
Forum: Thermwood 3-Axis Machinery
Topic: how do I cut this piece on the router?
Replies: 26
Views: 4407

here it is zipped up
by Roger Erismann
Thu, Mar 01 2007, 7:35AM
Forum: Thermwood 3-Axis Machinery
Topic: how do I cut this piece on the router?
Replies: 26
Views: 4407

hee is one of the parts
by Roger Erismann
Wed, Feb 28 2007, 11:05PM
Forum: Thermwood 3-Axis Machinery
Topic: how do I cut this piece on the router?
Replies: 26
Views: 4407

Sorry the dimensions are

4\"x102\"x 1/2\"

the material to be cut is red oak
by Roger Erismann
Wed, Feb 28 2007, 10:41PM
Forum: Thermwood 3-Axis Machinery
Topic: how do I cut this piece on the router?
Replies: 26
Views: 4407

how do I cut this piece on the router?

Need to cut a seried of pieces like this for a large project....I made it using the display panel and display board function(tried it both ways)...but it will not nest... I was able to create a TWD however when I went to the router to get it cut there was nothing in the file(or control nesting didn'...
by Roger Erismann
Mon, Feb 26 2007, 7:41PM
Forum: Thermwood 3-Axis Machinery
Topic: making MDF doors on three axis machine
Replies: 10
Views: 1429

I was looking more at using e-cabs only...preferably nested with the job file... Using the profile modeler It was my understanding that the following steps were required in the door/drawer editor: 1 create/select tool 2 define path and depth 3 apply cut 4 save 5 apply drawer to assembly 6 nest(check...
by Roger Erismann
Sun, Feb 25 2007, 10:16PM
Forum: Customer Tools
Topic: Raised panel MDF doors!
Replies: 1
Views: 4226

Nano...

Here is the job file....

And the TWD....
by Roger Erismann
Sun, Feb 25 2007, 11:00AM
Forum: Thermwood 3-Axis Machinery
Topic: dovetails
Replies: 1
Views: 491

dovetails

When cutting the dovetail joints... What happens with the default settings....will they cut ok? We are running trials on 3/4(plenty of scrap) and I want know what settings are best in e-cabs and which ones are best left for the operator(at the machine)... I have included the job file for your review...
by Roger Erismann
Sat, Feb 24 2007, 5:33PM
Forum: eCabinet Systems Software
Topic: Design Sharing Submission Request
Replies: 13
Views: 3478

Dan, Your idea is excellent...if I could I would...for me 750 is alot right now in a few months it shouldn't be though... As a matter of fact I took a job in a much larger shop with a thermwood router very far away form my home to kick start my cash flow so I could remain very choosy about which job...
by Roger Erismann
Sat, Feb 24 2007, 5:17PM
Forum: eCabinet Systems Software
Topic: MDF drawer not nesting correctly
Replies: 7
Views: 1069

Joe, Here is the job file...everything is run on 3/4 because we will be using whatever scrap we have to run this test...I changed the profile a little and got the front dovetails to nest but the inner bead on the d-fronts still wont go.. There is no \"thermwood\" option to run drawer front...
by Roger Erismann
Sat, Feb 24 2007, 4:58PM
Forum: eCabinet Systems Software
Topic: Saving job files to CD
Replies: 1
Views: 430

Saving job files to CD

I have emailed job files several times however when I write them to a CD they never come out right I get the message

\"E-cabs job data missing or invalid\"

What am I doing wrong...

This does not happen with TWD files....
by Roger Erismann
Sat, Feb 24 2007, 4:42PM
Forum: Thermwood 3-Axis Machinery
Topic: making MDF doors on three axis machine
Replies: 10
Views: 1429

making MDF doors on three axis machine

What tools (router bits) do i need to mill raised panel doors on 3-axis machine?
by Roger Erismann
Sat, Feb 24 2007, 4:41PM
Forum: eCabinet Systems Software
Topic: Design Sharing Submission Request
Replies: 13
Views: 3478

On another note... Advertising design services connected to CNC output to me or another user is kind of like selling eggs to a chiken farmer... What may have a good pay off is putting this concept out there to the designer/architect or GC crowd that has no concept of the nuts and bolts but needs an ...
by Roger Erismann
Sat, Feb 24 2007, 2:11PM
Forum: Design Sharing
Topic: eCabinet design service?
Replies: 2
Views: 2244

Robert take a look at a post I just submitted in the software forum:

http://www.thermwood.com/forums/viewtopic.php?t=5143
by Roger Erismann
Sat, Feb 24 2007, 2:07PM
Forum: eCabinet Systems Software
Topic: Design Sharing Submission Request
Replies: 13
Views: 3478

Ouch...I am being tag teamed by Dan and Kerry... I think you misunderstood or I misrepresented... Kerry wrote: \"The advantage of the Design Sharing Library is the fact that if I design a vent hood for one person as Roger is suggesting, that one person pays for all of my time which could get ex...

Go to advanced search