Search found 43 matches
- Mon, Jan 15 2007, 6:20PM
- Forum: eCabinet Systems Software
- Topic: Quick Question
- Replies: 7
- Views: 8142
I have received the cutpath error before and trying these constraints does not give the error. Yes, I am using a back to make the doors because with the vertical grain on the part and the face view it makes it easy to see what I have. I was unable to change the size of a display panel after adding i...
- Mon, Jan 15 2007, 3:52PM
- Forum: eCabinet Systems Software
- Topic: Quick Question
- Replies: 7
- Views: 8142
- Mon, Jan 15 2007, 12:59PM
- Forum: eCabinet Systems Software
- Topic: Quick Question
- Replies: 7
- Views: 8142
- Thu, Jan 11 2007, 2:05PM
- Forum: eCabinet Systems Software
- Topic: Quick Question
- Replies: 7
- Views: 8142
Quick Question
I'm sure someone has already posted this. I would like to be able to put constraints on parts with profile cuts. If these parts are cut from a cabinet part then they would be \"sizeable\". My question is, Is this something that is already being worked on and when is it expected to be relea...
- Wed, Dec 27 2006, 1:46PM
- Forum: Thermwood 3-Axis Machinery
- Topic: machine is freezing on me
- Replies: 2
- Views: 3007
machine is freezing on me
in the start of sheets, the machines start mode run then don't go anywhere so u have to push eme. stop then if i try to start on the sheet agian it won't home it puts ifself on emergency stop
- Tue, Oct 17 2006, 5:41PM
- Forum: Thermwood 3-Axis Machinery
- Topic: wrong tool creating dado
- Replies: 3
- Views: 3666
Thanks for the input. It seems like David's idea explains what is going on. I will try to change the tooling order and see if it works. I was on an emotional rollercoaster last night with the Cardinals. It felt like I had my wallet stolen. They are called the Cardiac Cards for a reason. Go Big Red!!
- Tue, Oct 17 2006, 4:01PM
- Forum: Thermwood 3-Axis Machinery
- Topic: wrong tool creating dado
- Replies: 3
- Views: 3666
wrong tool creating dado
Sometime after we installed the control nesting build 5.02 our machine started to do our dados with a diferent bit then we wanted it to. i turned off the interpolate, the drill, and the route and it still wants to use that bit. i even tried to remove it from the tool list. the machined has always us...
- Wed, Oct 11 2006, 10:23AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Nesting error
- Replies: 3
- Views: 3701
I am getting this error at the machine. I got a will not nest this part error in ecabinets for the left-right stretcher. When filtered, it nested correctly. I made it in build 9. I regenerated it in build 10 and resaved it and get the same error at the machine. Now when I nest it in ecabinets it sho...
- Fri, Oct 06 2006, 3:02PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Nesting error
- Replies: 3
- Views: 3701
Nesting error
I loaded a job with part editor cuts and display panels and as soon as I click ok I get an error saying \"Data type conversion error\". What does this mean and what do I need to do to fix it? Here is the file if it helps.
- Fri, Sep 22 2006, 3:22PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Tool errors
- Replies: 2
- Views: 3140
Tool errors
I have made a 20mm hole that I associated with some KD hardware. I have a drill bit that I want to use for the hole that is 20mm. We've tried to put the bit in the drill bank and the router with no luck. The error reads \"unable to find a tool to do a selected operation\". Where could the ...
- Wed, Sep 06 2006, 10:23AM
- Forum: Thermwood 3-Axis Machinery
- Topic: THM crash
- Replies: 5
- Views: 5276
- Tue, Sep 05 2006, 1:11PM
- Forum: Thermwood 3-Axis Machinery
- Topic: THM crash
- Replies: 5
- Views: 5276
- Fri, Sep 01 2006, 3:20PM
- Forum: Thermwood 3-Axis Machinery
- Topic: THM crash
- Replies: 5
- Views: 5276
THM crash
When we try to load an Excel file at the machine Thermwood Control crashes. I can click on load for excel files then select the file and click then I'm immediately sent to the desktop. Any suggestions?
Chris
Chris