Search found 281 matches
- Tue, Dec 29 2015, 8:08PM
- Forum: eCabinet Systems Software
- Topic: A couple of issues I need to solve with this cab design
- Replies: 5
- Views: 7857
Re: A couple of issues I need to solve with this cab design
Hello To add the backing strips - in cabinet editor, add display panels of your choice wood and size. By adding display panels they will be set in your cut list and nested You can use the part editor to rabbit the back of the face frame if you want to see it but otherwise when setting your panel you...
- Sat, Dec 26 2015, 8:30AM
- Forum: eCabinet Systems Software
- Topic: Sloped vent hood top
- Replies: 5
- Views: 8454
Re: Sloped vent hood top
Tony You are correct, you can not save 2 cabinets as 1 but your assembly will work just like a cabinet in your room As I said I did not cut my hood it was for show only. I looked at yours and if that is what you need then it is just right. If you are planning to cut it out and build it I might sugge...
- Wed, Dec 23 2015, 9:24PM
- Forum: Customer 3D Files
- Topic: want to create 3d item
- Replies: 4
- Views: 23491
Re: want to create 3d item
Thank you Mark, Yes Kerry spoke about Accu Trans 3D and I am trying to learn on it but I don't really understand 3D I have not been able to find a DXF or STL file to import for the wood rack, did you draw yours from scratch? I downloaded the HSF files and will play with them Thank you again Tim
- Tue, Dec 22 2015, 7:30AM
- Forum: eCabinet Systems Software
- Topic: Sloped vent hood top
- Replies: 5
- Views: 8454
Re: Sloped vent hood top
Here is the file for it
Tim
I just used the rotate tool and part editor to create the look of the hood - I did not cut the hood out from this fileTim
- Mon, Dec 21 2015, 8:04PM
- Forum: eCabinet Systems Software
- Topic: Sloped vent hood top
- Replies: 5
- Views: 8454
Re: Sloped vent hood top
Is this what you mean? or Timt w fortier wrote:Hi...
Is there a way to slope the top of a vent hood in ecabinet or door ?
tony
- Thu, Dec 17 2015, 10:32AM
- Forum: Customer 3D Files
- Topic: want to create 3d item
- Replies: 4
- Views: 23491
want to create 3d item
Many times George D. has created 3d items for myself and others but I would like to learn a little so...
I have searched the web for a DXF or STL file of a under cabinet wine glass rack no find
how would I start to create this ??
Thanks
Tim
I have searched the web for a DXF or STL file of a under cabinet wine glass rack no find
how would I start to create this ??
Thanks
Tim
- Tue, Dec 15 2015, 5:26PM
- Forum: eCabinet Systems Software
- Topic: snap resolution
- Replies: 3
- Views: 5629
Re: snap resolution
The only thing I can think of is in the "Drafting Parameters" you could set Round to nearest inch = 1.0
Maybe that will help
Tim
right click on page for Drafting ParametersMaybe that will help
Tim
- Mon, Dec 14 2015, 7:49PM
- Forum: eCabinet Systems Software
- Topic: Phantom circles on corner units
- Replies: 7
- Views: 8900
Re: Phantom circles on corner units
Ok I think your on to something - I loaded a corner cabinet from the standard library and I CAN reproduce the circles
so it must have something to do with that library of cabinets and the gremlins are still running loose
Tim
so it must have something to do with that library of cabinets and the gremlins are still running loose
Tim
- Sat, Dec 12 2015, 9:01AM
- Forum: eCabinet Systems Software
- Topic: Phantom circles on corner units
- Replies: 7
- Views: 8900
Re: Phantom circles on corner units
Not seeing it here
- Sat, Dec 12 2015, 8:55AM
- Forum: eCabinet Systems Software
- Topic: Interior walls
- Replies: 4
- Views: 7226
Re: Interior walls
Tim, Thank you. That helps. Do you know if there is any way to get dimension lines to these interior walls. Not sure what you mean, should look like this Capture.PNG Or if you need more, you can take the layout into the "Line Drawing Editor" and add all the measurments Capture2.PNG Tim
- Fri, Dec 11 2015, 8:13AM
- Forum: eCabinet Systems Software
- Topic: Interior walls
- Replies: 4
- Views: 7226
Re: Interior walls
If you set your starting point to 0,0 to start building your walls you can calculate where you need your interior walls
and if you turn on your snap and set it to 1 inch it will make it a little easier
hope this helps
Tim
and if you turn on your snap and set it to 1 inch it will make it a little easier
hope this helps
Tim
- Thu, Dec 10 2015, 8:13PM
- Forum: eCabinet Systems Software
- Topic: Tenon cleanup
- Replies: 9
- Views: 12449
Re: Tenon cleanup
For what it's worth. There is a beta version of the link 1.0.21 Beta 1. If you use a ShopBot you should use this version. If tenons are too long you might try setting the dado depth clearance deeper when you create your cabinet, if the tightness of your machine is similar to the tolerances you set ...
- Thu, Dec 10 2015, 7:48AM
- Forum: eCabinet Systems Software
- Topic: Tenon cleanup
- Replies: 9
- Views: 12449
Re: Tenon cleanup
I cut the pocket with a 1/4" down and use a compression for the outline
It seems like the pocket should cut out a little more
Thanks
Tim
It seems like the pocket should cut out a little more
Thanks
Tim
- Wed, Dec 09 2015, 5:01PM
- Forum: eCabinet Systems Software
- Topic: Tenon cleanup
- Replies: 9
- Views: 12449
Tenon cleanup
Using a blind dado for a joint and the tenon needs lots of cleanup
In the Shopbot link, is the pocket tool setup used to clean it up? Thanks
Tim
In the Shopbot link, is the pocket tool setup used to clean it up? Thanks
Tim
- Sat, Nov 28 2015, 7:35PM
- Forum: eCabinet Systems Software
- Topic: Version 6.1 What Do You Think?
- Replies: 11
- Views: 16606
Re: Version 6.1 What Do You Think?
Yes, well said !!
Thank You, Thank You!!
Thank You, Thank You!!