Thermwood / eCabinet Systems

Ayberk, the controller might be too close to a window not windows it self. If its cold maybe it needs heating up. A electric blanket may help or a air conditioner on warm cycle. Seriously a Ram upgrade might help for the little cost it is. If your game, a new faster hard drive with a big cache might...

Thanks Josh for your reply. Do you use CW yourself or have you seen the results? I was hoping to speak to someone on the method,the link is established.
Regards
Neville

I was wondering if anyone is using this Cabnetware postprocessor and could give me a overview on how it works? Does it print labels from the control? Are the labels colour coded like Ecabinets? If there is something in detail on Thermwoods site feel free to give me the link. Would be interested in u...

As much I'd love to go to IWF I won't be there. Is there going to be a live feed again this year? If there is could some one post some highlights onto youtube as we are 12 hours out of step with Atlanta. As much as I'd like to watch what was happening with the staff live at the stand I'd rather be t...

Good Jason.
Will be good to catch up and exchange cards. Its always good to have contacts if we need help or a shoulder to cry on.
Will be at the Thermwood Bar with a row of drinks lined up.
Regards

Neville
PS Jason stop ringing me. I know that heavy breathing is you.

Hi Michael, Our MTR is cabled networked which maybe yours does not have that option. With the wireless if you are having signal strength issues you can boost the signal with a directional antenna or you can have a repeater setup. Which increases the signal by double. You may need to drag in a comput...

Gerry, we use artcam for signs and things we find a bit hard through Ecabinets. Are your sure the signwriters software does not export to the Thermwood as Artcam does. I think enroute does as well? Maybe you could get a dxf and send to the Thermwood guys and they could say if it possible? Regards Ne...

Ok, Looks Like Friday is the day, about 12.30 1pm
My mobile is 0429443999 if you need it.

Regards
Neville

Does any Ecabinet or Thermwood user want to meet up for Lunch one day of the Awisa event in Sydney. I will be there from Wed to Fri so maybe if others wish to list what days they will there we can find a common day. I think Flecknoe is paying for lunch so that will be good. ha ha only joking. We cou...

Hi Chris, We are cutting 5/8 melamine particleboard all the time so our figures are fairly reliable, We use a Onsrud 60-126 mw at 18,000 rpm with feed at 85 feet a minute or in our settings 25to 27m a minute. I have been told by the tooling supplier a client of his runs the same bit at 31meters a mi...

Thanks guys, Yes you have given me some thoughtful ideas. The cycle between jobs is probably less than 15minutes so maybe the extra wear and tear on the pumps is not worth while. I noticed the demo version I saw in Sydney had a inverter so it could slow down and ramp up the pumps. Down side was the ...

On a bit of a economy drive as my states energy producer is jacking up electricity by 15 percent in July. Is there a way from the controller to turn on and off the pumps? I was hoping I could turn them on when I was ready to start cutting then maybe when the last sheet was cut when it heads back to ...

Hi Jeremy. Glad you solved the quality issue of the tenon cut. I noticed you dropped your feed speed. We did go down that route a few years back but were getting low hrs on the router bits. When we checked with our supplier they said our feed speeds were too low and were actually causing excessive h...

So Jeremy, have you done any more fine tuning or was the last post the answer to the problem?
Regards

Neville

Well Ben look on the bright side. You have a few spare parts if something goes wrong.
Maybe Kevin needs a 6 pack of something?
Regards

Neville