Search found 604 matches
- Tue, Mar 31 2015, 3:47PM
- Forum: eCabinet Systems Software
- Topic: Back of Lazy Susan lower
- Replies: 8
- Views: 7931
Back of Lazy Susan lower
At one time I remember being able to change the material individually for those backs. Normally in my construction I use 1/2" backs for the side backs and the angle back I would use 3/4" material and that would go to the floor as the third leg. There use to be a way to change it out, I rem...
- Tue, Mar 31 2015, 3:44PM
- Forum: eCabinet Systems Software
- Topic: It would be nice if....
- Replies: 0
- Views: 4029
It would be nice if....
The depth of the drawer would show up in the editor. Just had fun putting drawers in a couple of times because I didn't check. Always wondered why it didn't show that dimension anyway.
- Fri, Jan 16 2015, 3:55PM
- Forum: eCabinet Systems Software
- Topic: Dado Depth
- Replies: 2
- Views: 4501
Dado Depth
The standard for the dado depth seems to be 3/8". Is there a way to change it so it's always 1/4" instead? I rarely use seed cabinets because I am custom and my cabinets are always changing. Or do I have to stop using the built in cabinets and make my own "standard" seeds. I'd li...
- Tue, Jan 06 2015, 9:21PM
- Forum: eCabinet Systems Software
- Topic: DXF's and profile tools
- Replies: 2
- Views: 3382
Re: DXF's and profile tools
Got it figured out. 1st problem was I didn't start my DFX image at 0,0 I opened the part editor by selecting a part. Then I went into contour mode. Then I opened up the DFX file. I chose trim with the two entity option. And then I went around the DFX object and chose intersecting parts. This connect...
- Tue, Jan 06 2015, 8:10PM
- Forum: eCabinet Systems Software
- Topic: DXF's and profile tools
- Replies: 2
- Views: 3382
DXF's and profile tools
OK, I'm here again. I made a crown shape in AutoCAD and saved it as a DFX file. I opened the DFX file in the Shape Manager. I chose the make tool icon and then went to chose my contour and it seems to be 16 individual elements instead of a closed contour.
How do I close this so it can be selected?
How do I close this so it can be selected?
- Tue, Jan 06 2015, 11:20AM
- Forum: eCabinet Systems Software
- Topic: Conestoga doors ignore partition and doors overlap
- Replies: 6
- Views: 7628
- Fri, Jan 02 2015, 1:01PM
- Forum: eCabinet Systems Software
- Topic: Conestoga doors ignore partition and doors overlap
- Replies: 6
- Views: 7628
Re: Conestoga doors ignore partition and doors overlap
Yep, it's happening on a few of my cabinets. I was wrong about the matching color fixing it. Seems to have reverted back to the big space. Seems sorta random. Some doors/drawers do it, some don't I have a drawer and double door in the same cabinet (with 2 other pairs of doors). The drawer is fine wh...
- Fri, Jan 02 2015, 12:09PM
- Forum: eCabinet Systems Software
- Topic: Mixed FF and Euro
- Replies: 0
- Views: 4037
Mixed FF and Euro
A lot of my cabs are mixed. I have FFs surrounding the outers of the cabinet and the insides are Euro, meaning tight margins (5/64") between doors with only the partition or fixed shelf behind the door/drawer. I remember being able to put a pair of doors into the cabinet by using a large offset...
- Fri, Jan 02 2015, 12:04PM
- Forum: eCabinet Systems Software
- Topic: Conestoga doors ignore partition and doors overlap
- Replies: 6
- Views: 7628
Re: Conestoga doors ignore partition and doors overlap
I just had this happen in a FF cabinet. Looked good in the CE but brought it out to MAIN and then the doors shrunk leaving a large margin gap. I changed the texture of the door to match the FF and then the gap went to normal.
- Sat, Dec 20 2014, 10:20PM
- Forum: eCabinet Systems Software
- Topic: Will this new update finally kill me off?
- Replies: 9
- Views: 9708
Re: Will this new update finally kill me off?
Well it looks like v6.15 will work. Still have to pot my video into cripple mode, but it does work still. I haven't done a new job on it yet so I hope everything will still function good.
- Thu, Dec 11 2014, 7:53AM
- Forum: eCabinet Systems Software
- Topic: Thermwood CNC services in Conn
- Replies: 7
- Views: 7785
Re: Thermwood CNC services in Conn
Thanks for responding Josh. Do you per chance deliver after processing, or is it pick up only? I don't do that many full kitchens so I wouldn't be a prime customer. But if it works out it sure would make things easier.
- Wed, Dec 10 2014, 11:05PM
- Forum: eCabinet Systems Software
- Topic: Thermwood CNC services in Conn
- Replies: 7
- Views: 7785
Thermwood CNC services in Conn
Just had a job done by a conventional CNC by a local guy and wasn't very pleased with the product or the time to produce. I was wondering if there was a list of owners who would do work for others using the eCab program. At one time I know there was a guy in Conn that had one, but I don't have the i...
- Fri, Nov 21 2014, 2:53AM
- Forum: eCabinet Systems Software
- Topic: Will this new update finally kill me off?
- Replies: 9
- Views: 9708
Re: Will this new update finally kill me off?
OK, the main problem I have is with the file IGLICD32.DLL. I had the original version that came with my computer, when I use this version I can't load the room without eCabs crashing. If I go into the cabinet editor it works find and is snappy and speedy. Then I did an upgrade to my video driver. I'...
- Wed, Nov 19 2014, 1:47AM
- Forum: eCabinet Systems Software
- Topic: Will this new update finally kill me off?
- Replies: 9
- Views: 9708
Re: Will this new update finally kill me off?
I tried the force rendering. It does what you said. But it also kills the ability to have acceleration when I work in the cabinet editor. I guess it's back to manually switching between the two. Thanks
- Tue, Nov 18 2014, 5:34PM
- Forum: eCabinet Systems Software
- Topic: Will this new update finally kill me off?
- Replies: 9
- Views: 9708
Re: Will this new update finally kill me off?
I'll try that. Thanks.