Mike,
Just forget the cutlist and outsource your parts to me.
Forrest
Search found 800 matches
- Tue, Jan 02 2007, 5:47PM
- Forum: eCabinet Systems Software
- Topic: Thermwood team...
- Replies: 22
- Views: 19592
- Fri, Dec 29 2006, 4:04PM
- Forum: eCabinet Systems Software
- Topic: Blind Dado Settings
- Replies: 9
- Views: 8410
Ben and All, The tolerance should apply to the dado created by the part. So far as I know after much discussion on this subject your initial thoughts were correct, Ben. If this is not happening then it must be a bug. Dave must remember this was changed in V4 along the way for some reason and then th...
- Wed, Dec 27 2006, 12:42PM
- Forum: eCabinet Systems Software
- Topic: mdf paint doors
- Replies: 10
- Views: 9228
Hey Mike, We make quite a lot of mdf doors and other products. Just like anything there is a trick to doing it well and efficiently. Currently Ecabs does not support doing this on a production level, but you can do very unique one off designs which you can charge handsomly for. If you want to do alo...
- Fri, Dec 22 2006, 11:05AM
- Forum: eCabinet Systems Software
- Topic: Association of Door & Drawer
- Replies: 4
- Views: 6051
- Wed, Dec 20 2006, 6:29PM
- Forum: eCabinet Systems Software
- Topic: Anoterh 'Material Not Found Error'
- Replies: 4
- Views: 5722
- Tue, Dec 19 2006, 3:55PM
- Forum: eCabinet Systems Software
- Topic: Replace material Bug
- Replies: 13
- Views: 12489
- Tue, Dec 19 2006, 11:57AM
- Forum: eCabinet Systems Software
- Topic: Replace material Bug
- Replies: 13
- Views: 12489
- Mon, Dec 18 2006, 9:07AM
- Forum: eCabinet Systems Software
- Topic: Replace material Bug
- Replies: 13
- Views: 12489
- Sun, Dec 17 2006, 10:39AM
- Forum: eCabinet Systems Software
- Topic: Replace material Bug
- Replies: 13
- Views: 12489
Nick, I also am having some problems with this recently. Scott Vaal and I are trying to figure this one out. My job did not go bye-bye but it was worthless by the time I was done with it. The part that I love the most was when ecabs created its own material and kept prompting me to use it when it di...
- Fri, Nov 17 2006, 8:35AM
- Forum: Thermwood 3-Axis Machinery
- Topic: typewriter
- Replies: 8
- Views: 7103
Mike K, I'm not sure when the new style tool gripper came out but I just put on for a tool that runs a long time and would pop out and thru. It doesn't cost much and Im going to replace all of them. They also use a thick rubber band now instead of the foam strip. The new gripper is a 2 piece and all...
- Thu, Nov 16 2006, 1:14PM
- Forum: Thermwood 3-Axis Machinery
- Topic: typewriter
- Replies: 8
- Views: 7103
Mark, Are the tools poping out loudly and pushing thru the tool holder? Often this is because the tool holders are not being cleaned and have buildup that becomes sticky when ran in the head for a long time. One option that will fix the tool is to purchase the new style plastic clips. They have a fl...
- Wed, Nov 08 2006, 5:43PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Drawer Boxes
- Replies: 11
- Views: 8711
- Fri, Nov 03 2006, 12:51PM
- Forum: Thermwood 3-Axis Machinery
- Topic: tool diameter errors
- Replies: 15
- Views: 11989
Jason, I think Steven is saying when he uses a .25 tool and enters a .25 tool the parts do not cut correctly but when he uses a .248 tool and enters the .248 tool it cuts correctly. I also have an issue with my .25 deep tenons when a smaller than .25 tool cuts the tenon to thickness it does not cut ...
- Wed, Nov 01 2006, 1:08PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Skin All
- Replies: 6
- Views: 5605
Jody, Nick does this for the first pass then comes back and set his wasteboard the correct thickness for the cleanup pass. This right now is the only way to do double pass on all parts without actually changing your sq. inch settings. However if we have 10 sheets with 6 different size parts we don't...
- Tue, Oct 31 2006, 3:29PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Skin All
- Replies: 6
- Views: 5605
Skin All
Thermwood,
In control nest settings can we get a simple \"skin all parts\" button?
This would save time and maybe trouble from having to change our square inch setting back.
Thanks,
Forrest
In control nest settings can we get a simple \"skin all parts\" button?
This would save time and maybe trouble from having to change our square inch setting back.
Thanks,
Forrest