Search found 190 matches

by Tim Massa
Thu, Jan 23 2014, 1:16PM
Forum: eCabinet Systems Software
Topic: PTrouble with stretcher in part editor.
Replies: 7
Views: 6246

Re: PTrouble with stretcher in part editor.

Whoops! I remembered to remember that we have to zip files on forum unlike the HSF's. Ok. All I did was drag the up down stretcher into the part editor and then the next whachamacallit editor where you can load a DXF file from. Return to part editor. Right click and select 'create pocket using close...
by Tim Massa
Thu, Jan 23 2014, 12:30PM
Forum: eCabinet Systems Software
Topic: PTrouble with stretcher in part editor.
Replies: 7
Views: 6246

Re: PTrouble with stretcher in part editor.

Scott,

I'll have to e-mail you the DXF as the web site doesn't seem to be uploading the file.
by Tim Massa
Thu, Jan 23 2014, 9:31AM
Forum: eCabinet Systems Software
Topic: PTrouble with stretcher in part editor.
Replies: 7
Views: 6246

PTrouble with stretcher in part editor.

Display panels too! I've been trying to put some 5mm holes in an up/dpwn oriented stretcher that was created for a blind corner cabinet. The stretcher is serving as a "4th" side that have an adjacent base cabinet butting into it from the adjacent perpendicular wall. The Stretcher will be g...
by Tim Massa
Mon, Sep 23 2013, 9:19AM
Forum: eCabinet Systems Software
Topic: Tooling error in nest
Replies: 5
Views: 5286

Re: Tooling error in nest

Found a pocket cut thru dimension that I had drawn a little to small by accident in one of the cabinets, Fixed that and the cabinet nested fine. Still no luck with the pocket operation for the front edge of the blind dado tenons that I had on the decks of the corner cabs (in order be able to put a c...
by Tim Massa
Fri, Sep 20 2013, 3:09PM
Forum: eCabinet Systems Software
Topic: Tooling error in nest
Replies: 5
Views: 5286

Re: Tooling error in nest

O.K. tried running Link with some older settings that have run fine. Difference seems to be these corner cabs with the decks getting a blind dado tenon. Run this tenon on upper cabinets on recent projects without any problem so I'm guessing it's the corner cab having the fly's on it. Line 825 keeps ...
by Tim Massa
Fri, Sep 20 2013, 1:23PM
Forum: eCabinet Systems Software
Topic: Tooling error in nest
Replies: 5
Views: 5286

Re: Tooling error in nest

Thanks Josh,

Here ya go.
by Tim Massa
Fri, Sep 20 2013, 1:15PM
Forum: eCabinet Systems Software
Topic: Tooling error in nest
Replies: 5
Views: 5286

Re: Tooling error in nest

The screen shot shows a cabinet that has caused the link nest to buck and throw up this error message. The tenon is 3/8" long and the percentage thickness is whatever is needed to be to get to .375" .(think it was 52%) Cutting to the chase, my outline/ pocket dado tool is a resharpened m.c...
by Tim Massa
Fri, Sep 20 2013, 12:35PM
Forum: eCabinet Systems Software
Topic: Tooling error in nest
Replies: 5
Views: 5286

Tooling error in nest

Would anyone at Thermwood be able to help look at this issue for me. Keep getting a tooling error when I try and nest out this batch job. Seems to be a pocket operation that it does not like for some reason. I've been over and over the settings and can't come up with the solution. Attaches is one of...
by Tim Massa
Mon, Sep 09 2013, 9:22AM
Forum: eCabinet Systems Software
Topic: Corner cabinet solution
Replies: 3
Views: 4604

Re: Corner cabinet solution

Awesome, Thanks guys. Thought there was a spot for that setting. Stared at he construction settings all morning and it was right there in plain sight!

Thanks again,

Tim
by Tim Massa
Mon, Sep 09 2013, 8:32AM
Forum: eCabinet Systems Software
Topic: Corner cabinet solution
Replies: 3
Views: 4604

Corner cabinet solution

Does anyone know if it's possible to get rid of the narrow center back portion of the corner cabs? I have an unusual bifold corner application that needs to have that 'center back' removed so that there is a 90 degree corner.

Thanks
Tim
by Tim Massa
Thu, Sep 05 2013, 3:58PM
Forum: eCabinet Systems Software
Topic: Updating product image
Replies: 9
Views: 7835

Re: Updating product image

Thanks Scott,

Just tried it and worked like a charm. That is going to be a big help in setting up seed cabinets for others as well as myself.

Regards,
Tim
by Tim Massa
Wed, Sep 04 2013, 6:39PM
Forum: eCabinet Systems Software
Topic: Updating product image
Replies: 9
Views: 7835

Re: Updating product image

O.K., I tried adding leg levelers, sockets, etc.. to a seed cabinet thru the cabinet buy list. Used the 'Add Items to Assembly' button in the cabinet buy list and re-saved seed cabinet in my seed cab folder. Started new, reloaded seed cab and checked the cab buy list. None of the added bits of hardw...
by Tim Massa
Tue, Sep 03 2013, 1:35PM
Forum: eCabinet Systems Software
Topic: Updating product image
Replies: 9
Views: 7835

Re: Updating product image

Building the seed cabinet with the hardware added then saved?
by Tim Massa
Tue, Sep 03 2013, 1:33PM
Forum: eCabinet Systems Software
Topic: Updating product image
Replies: 9
Views: 7835

Re: Updating product image

Kerry, if you don't mind me asking I couldn't help notice some of the hardware that you had in the buy list. The leg levelers and shelf pins for instance. Are you adding them in manually or is there a way to have them associated with a cabinet that makes that hardware get added automatically? It wou...