Thermwood / eCabinet Systems

i have attached the esj file in this post as the previous post was not allowing more than 3 attachments


pls some one go through it and suggest what is causing
thanks to one and all

mohan

HI all we are facing a problem in cn5.57 & 5.56 after loading the job we can find the drawer box sides and front coming up with a very big negative dimension and causing system freeze but practically there are no left and right and front sides on this drawer box as we are using metal slides stan...

thanks ryan but before i get ur message i have reinstalled the whole image of c:drive freshly as there was another issue of no disk sace on c:drive left with only 200mb due to windows updates adobe updates office updates internet explorer updates and antivirus is there any way to increase the partio...

hi all we are having a severe problem with control nesting once entering into control nesting the thermwood genration 2controller installer comes up and after a minute or so it gives me 2errors and it keeps repeating the same error messages no end. CN was working fine after i have upgraded to 5.53 t...

in version 6 are there ANY IMPOVEMENTS ON EDGE BANDING OF DRAWERS AND DRAWER FRONTS & DOORS as still we face problems with these stickers (half details on them)

i hope this issue should have been addressed in version 6

thanks for that RYAN
i hope as you said this issue will be fixed in the next update release
ur suggestion has solved the issue for now
thanks

iam trying to do a simple job with 2 pockets of 7.5mmwide and 1150mm long through cut gives me error failed to create toolpath for the pocket operation

what is that missing in my settings,its fine with other jobs pls help

we are trying to do a job which got 6mm holes in 32mm apart in rows and 16mm apart in coloums and when i use dxf in cn it is using only one drill instead i want use 5 drills from the drill bank, what iam doing wrong pls advice

thanks

There are future plans to allow customers to change the nesting but there is no time table on this option's release. As for now, when you have smaller nests like what you have, you are limited by what the Control Nesting software wants to do. The only way around this is to trick the software as I d...

hi daniel i think i have to agree with u daniel computer is not so smart as human but what is the point in doing this trick again inspite of having so big control nesting and all the options like rotating componets and nesting in x and y directions and still we(human) have to spend time in finding o...

we r doing a job and getting stuck in layout problem is it is not nesting in the right way and using extra sheet had this problem in different jobs before aswell, but we got only 2 sheets(2400x1200) now and it is possible in 2 sheets practically, iam attaching the esj twd and machine settings aswell...

As of now, when a pocket area is larger than the pocket area through cuts value, the pocket is cut as an outline and does not do a cleanup pass. If you email me (program@thermwood.com) the export from your control nesting along with the esj file, I can take a look at what you are trying to accompli...

I'm not sure if I understand what you are wanting. It sounds like you are wanting to use a 5mm bit to do a cut through on a pocket cut in your countertops to create a pocket with a 2.5 inch radius in the corners. The pocketing routine will try to use the largest tool capable of doing this. If you a...

The software is designed to use the largest tool it can to perform a pocket and then use smaller tools for cleaning up the pockets. If you are wanting to use a smaller tool, you will need to uncheck pocketing for the larger tool in the tooling section but then it will not use this tool for any pock...

hi all we are facing a problem today while machining ajob, one is through pocket and other one is blind pocket . in blind pockets iam able to control the radius by using settings in clean up but in through pockets it is using a tool larger than what i want how to control it,we have put the radius in...