Thermwood / eCabinet Systems

It would be great if the hardware hole editor allowed patterns created below the x-axis to reference from the top of the front. This would allow us to use a pattern for flipper hinges easily. It would also be nice if a door allowed for a top hinge too. While I'm on the subject what about a pattern t...

The option to turn the grain off on say toekicks and stretchers would be immensely helpful. I know this has come up a few times over the years and I'm sure the need is still there. I have another design software with this feature that I can save a couple sheets on a given job sometimes by doing this...

Thanks Clint! The views keep going up so lots of interest for sure. One other thing that would be nice to work in is the ability to choose different drawer fronts depending on location. In a stack of drawers we do full width rails on lower fronts and reduced width for the top ones. This is also need...

It would be nice to have the option when doing duplicate left or right to select how many you want. Or to just have a copy and paste function.

Forrest

Any news on this yet? I'm overwhelmed with orders where I'm having to redraw my customers jobs in another software adding significant time and cost. It's getting old trying to explain to them why I can't just swap the doors out and why the labels won't match their ecab drawings.

Forrest

Stuart, everything is running properly as much as I can tell (fans and compressor). It's not getting very dusty but we still blow it out every day. It may be low on refrigerant but I haven't had time to have it checked.

Forrest

I'm getting an overflow error of to many parts when trying to nest a drawer box order with 2000 parts. Is that normal and if so what is the limit?

Forrest

We are having an issue with the ac unit on our CS43 getting hot. At the factory default setting of 82 it will get over 100F and set off the alarm. After speaking with the company they suggested turning it down to 70 but it still gets up to 95F by days end. We keep the shop on a steady 75F so I would...

This whole time I thought the pattern moved from the side of the drawer towards the outside of the cabinet. I believe it used to work that way. Thanks for getting me to revisit that.

Forrest

When in custom layout and wanting to make duplicates can we get a prompt asking how many we would like instead of it just filling up a wall and resizing the last one.

Forrest

I mentioned this years ago to Thermwood and thought I'd revisit it to get some more user support. It would be extremely helpful to have the ability to transfer a part edit from one part to an adjacent part it is touching. This would help with cabinet connectors where the sides touch as well as mount...

Hey Tommy,

I've found these to be relatively easy to remove for about 2 weeks and then depending on the temps get harder after that. They do offer a removable label also. If you handle the parts carefully that may work better for you.

Forrest

This is the cheapest I've seen these but this is what I use https://quilltop.com/products/dymo-label-printer-labelwriter-450-direct-thermal-label-printer-great-for-labeling-filing-mailing-barcodes-and-more-home-office-organization?variant=23090482&gclid=EAIaIQobChMI98LV7bCU9wIV7xvUAR0qCAtDEAQYBC...

Make it as a slab door with banding. Select the material you want to cut it from and the banding you want applied.

Forrest

I should have read the last sentence, sorry Scott!

Thank you for the response Larry. I look forward to seeing what you guys come up with. I'm sure a few of us beta testers would love to get our hands on it first and hopefully have some input on improvements or tweaks.

Forrest