Thermwood / eCabinet Systems

Mark, There is a way to have the machine remind you at the beginning of every sheet to make sure you used the square if needed. The first thing you need to do is write a macro that asks you if you loaded the material correctly. This can be done with AFL or simple comment lines. Now you would need to...

Kyle, There are 2 different ways to select the hardware. The first way is to use the button called def+item, located next to the constraint manager button. Clicking this button will open a window which will give you a choice between cabinet items and cabinet defaults. Choose cabinet defaults. Here y...

Mark, The files you would want to back up would be the following: Toolman.thm, located in the \"C:\\system\" directory. Thm.ini, located in the \"C:\\system\" directory. thm.off, located in the \"C:\\offset.tab\" directory. Macm999.thm, located in the \"C:\\macros\...

Hutson,

You can order labels directly from our catalog dept, part #FSE0139. These are the labels that we use here at Thermwood. Just like any other label, the longer they are left on the piece, the harder they will be to remove.

Matt, I'm pretty sure that this is the information you are looking for. This is in addition to all the information already provided. Any files that you want to load and run on the machine have to be stored in the \"D:Data\" drive of the machine. If the file is located anywhere else on the ...

Georgi You stated in your one email that you could take the drawer box to another computer and it worked fine. We need to find out what the difference is in these two computers and exactly how you are adding this drawer to a job. Please email me the drawer and cabinet to program@thermwood.com along ...

Marius,

If you continue to have issues logging onto the forums, please give us a call so we can get it straightened out.

Justin,

I spoke with Michael earlier about this issue. I need to talk to the programmers about this.

marius

The AFL language does allow for a search for an occurance of a string inside of another string. This is easily done using the INSTR command. If you need any assistance on this, our custom programming department will send you a quote on programming this .

Georgi,

Can you email me a detailed description of the issue and a copy of the drawer box to program@thermwood.com att. Daniel, and I'll start looking into this right away.

geoffrey_au

If your \"part rotation step angle\" in your settings area is set too low the controller can take a very long time to nest. Generally this should be set to 90.
Check this and let us know.

In your CN settings area under cut parameters, you have NO offfall cuts checked. this means that the machine will not do anything with offfall. I hope this helps.

Sebastien, You will need to send me some files for us to get to the bottom of this. I will need an esj file that has a cabinet in it that causes this issue. I will also need the .cab file created by using the export button at the bottom of the Control Nesting main screen. The last file I will need i...

Rob,

This issue is on the eCabs side, not Control Nesting. It is listed and will be resolved for a future build.

Rob,

I have tried using your drawer box along with a couple of other drawer boxes. None of the drawer boxes had the fit or depth clearances when sent to the control. I have passed this onto the programmers so they can resolve it.