Hey Forest,
Detail in preferences for cabinet editor is set to max already.
Nest shows no spot holes on fixed shelf, but does show them on deck and top.
Search found 71 matches
- Sun, Mar 23 2014, 7:55PM
- Forum: eCabinet Systems Software
- Topic: Lock Dado w/ Pocket Screw. Spot hole w/ fixed shelf?
- Replies: 10
- Views: 8344
- Sun, Mar 23 2014, 1:50PM
- Forum: eCabinet Systems Software
- Topic: Lock Dado w/ Pocket Screw. Spot hole w/ fixed shelf?
- Replies: 10
- Views: 8344
Re: Lock Dado w/ Pocket Screw. Spot hole w/ fixed shelf?
I opened construction settings on the fixed shelf (2nd one up from deck) in the main menu and after closing all the windows it rebuilt WITH spot holes. Then after adjusting some other parts....pooof, it's gone again. I took a screen capture in case it reappeared. Cabinet attached is without spot hol...
- Sat, Mar 22 2014, 9:03PM
- Forum: eCabinet Systems Software
- Topic: Lock Dado w/ Pocket Screw. Spot hole w/ fixed shelf?
- Replies: 10
- Views: 8344
Lock Dado w/ Pocket Screw. Spot hole w/ fixed shelf?
Playing with this new (to me) joinery.
I can't seem to get a spot hole (on part with dado) when using this joinery on a fixed shelf (yes, box for spot dado is checked on add shelf settings).
Works on deck and top.
Am I missing something?
I can't seem to get a spot hole (on part with dado) when using this joinery on a fixed shelf (yes, box for spot dado is checked on add shelf settings).
Works on deck and top.
Am I missing something?
- Thu, Feb 20 2014, 10:02AM
- Forum: eCabinet Systems Software
- Topic: eCabinet Designer
- Replies: 1
- Views: 2598
eCabinet Designer
I have lost my old eCabinet designer/ planner and have too much work and too many hats to wear. After reading another post, just wondering if there are any top notch eCabinet operators who may have time and desire to do sub-contract work where they do the eCabinet portion of our jobs. I would actual...
- Thu, Feb 20 2014, 10:01AM
- Forum: eCabinet Systems Software
- Topic: eCabinet Designer
- Replies: 1
- Views: 2682
eCabinet Designer
I have lost my old eCabinet designer/ planner and have too much work and too many hats to wear. After reading another post, just wondering if there are any top notch eCabinet operators who may have time and desire to do sub-contract work where they do the eCabinet portion of our jobs. I would actual...
- Wed, Feb 19 2014, 5:45PM
- Forum: Thermwood 3-Axis Machinery
- Topic: DXF Pocket problem
- Replies: 13
- Views: 12596
Re: DXF Pocket problem
Scott,
That solved my issue with material thickness. thanks.
That solved my issue with material thickness. thanks.
- Wed, Feb 19 2014, 2:40PM
- Forum: Thermwood 3-Axis Machinery
- Topic: DXF Pocket problem
- Replies: 13
- Views: 12596
Re: DXF Pocket problem
Update: Scott, That worked as you already know. Any idea why the CN is asking for .7 material when the outline is .699? Not a big deal just wondering. Dave, Converting the circle to a polyline also worked. However, I was unable to get the "pedit" command to make a polyline out of the circl...
- Wed, Feb 19 2014, 2:05PM
- Forum: Thermwood 3-Axis Machinery
- Topic: DXF Pocket problem
- Replies: 13
- Views: 12596
Re: DXF Pocket problem
Scott,
Thanks. I had not even noticed that setting. I guess that clean up is kind of like a final pass allowance in ArtCAM.
I'll go test. Thanks very much!
Thanks. I had not even noticed that setting. I guess that clean up is kind of like a final pass allowance in ArtCAM.
I'll go test. Thanks very much!
- Wed, Feb 19 2014, 2:02PM
- Forum: Thermwood 3-Axis Machinery
- Topic: DXF Pocket problem
- Replies: 13
- Views: 12596
Re: DXF Pocket problem
Dave,
are you saying CN will treat "ALL" circles as a drill or all that are not converted to a polyline?
are you saying CN will treat "ALL" circles as a drill or all that are not converted to a polyline?
- Wed, Feb 19 2014, 12:43PM
- Forum: Thermwood 3-Axis Machinery
- Topic: DXF Pocket problem
- Replies: 13
- Views: 12596
Re: DXF Pocket problem
Here is the file you asked for.
- Wed, Feb 19 2014, 11:38AM
- Forum: Thermwood 3-Axis Machinery
- Topic: DXF Pocket problem
- Replies: 13
- Views: 12596
Re: DXF Pocket problem
hope this uploads...
- Wed, Feb 19 2014, 10:27AM
- Forum: Thermwood 3-Axis Machinery
- Topic: DXF Pocket problem
- Replies: 13
- Views: 12596
Re: DXF Pocket problem
well, I was unable to upload. "The extension dxf is not allowed." any other option or would someone let me send this to them via email?
thanks
thanks
- Wed, Feb 19 2014, 10:25AM
- Forum: Thermwood 3-Axis Machinery
- Topic: DXF Pocket problem
- Replies: 13
- Views: 12596
DXF Pocket problem
Hi Folks, A couple of questions: I'm trying to learn how to better use the DXF capability of my controller and have a test part that represents most part features we use. See attached DXF. Can someone tell me what is wrong with the pocket over the tenon intended to create my tenon (Cutting it down i...
- Thu, Jan 16 2014, 4:40PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Re: spoil switch and M999, how to access...
- Replies: 2
- Views: 3932
Re: spoil switch and M999, how to access...
Thanks! That was easy.
- Thu, Jan 16 2014, 8:47AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Re: spoil switch and M999, how to access...
- Replies: 2
- Views: 3932
Re: spoil switch and M999, how to access...
Re: spoil switch and M999 I'm getting back into the daily oversight of our Thermwood router and need a little help. I need to adjust the setting for the spoil switch and it looks like the manual is telling me to access the M999 macro by opening the tool measure dialog and then hit cancel. But when I...