Search found 604 matches
- Wed, Jun 03 2020, 11:36AM
- Forum: eCabinet Systems Software
- Topic: Profile modeler
- Replies: 17
- Views: 17110
Re: Profile modeler
For that particular profile I'd like it to use the 1/4" BN for the main cutting with the 1/8" BN getting closer in the corners and the 1/8" end mill to clean out the step downs. Is that not possible? If I set the 1/4" BN to leave stock will it not do the entire profile again wit...
- Wed, Jun 03 2020, 10:51AM
- Forum: eCabinet Systems Software
- Topic: Profile modeler
- Replies: 17
- Views: 17110
Re: Profile modeler
So I have two possible solutions to work around the issue: 1. Your group settings are calling for a 1/4" ballnose and 1/8" endmill to model. If you actually wanted the second tool to be an 1/8" ballnose(not sure as your previous post indicated both were ballnose bits), if you add a st...
- Wed, Jun 03 2020, 9:18AM
- Forum: eCabinet Systems Software
- Topic: Profile modeler
- Replies: 17
- Views: 17110
Re: Profile modeler
The Save Tooling/Settings will only grab the tooling and settings from Control Nesting. It does not get us anything from Profile Modeler, your machines tool table, etc. Export gets us most everything.
-Clint-
-Clint-
- Wed, Jun 03 2020, 7:29AM
- Forum: eCabinet Systems Software
- Topic: Profile modeler
- Replies: 17
- Views: 17110
Re: Profile modeler
Forrest,
Can you post an export from Control Nesting? If you don't want to post it, you can email it to cabinets@thermwood.com
-Clint-
Can you post an export from Control Nesting? If you don't want to post it, you can email it to cabinets@thermwood.com
-Clint-
- Thu, May 28 2020, 12:57PM
- Forum: eCabinet Systems Software
- Topic: Profile modeler
- Replies: 17
- Views: 17110
Re: Profile modeler
Is it an error in eCabinets or at the machine? Let me know if you can't get it figured out.
-Clint-
-Clint-
- Thu, May 28 2020, 11:12AM
- Forum: eCabinet Systems Software
- Topic: Profile modeler
- Replies: 17
- Views: 17110
Re: Profile modeler
Forrest, I feel like I am missing something with this one. I can't see too much of an issue creating a door like this. You won't be able to create it as an MDF door in the Door Designer, but you should be able to use a cabinet back, delete the extra parts, pocket the center in Part Editor, come out,...
- Thu, Apr 23 2020, 8:25AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Nesting a large number of small pieces
- Replies: 2
- Views: 5423
Re: Nesting a large number of small pieces
Mark,
For parts like this, I would try to change the setting under Action from True Shape, to Cut Line. I'm going to guess that will get it nesting better.
-Clint-
For parts like this, I would try to change the setting under Action from True Shape, to Cut Line. I'm going to guess that will get it nesting better.
-Clint-
- Wed, Apr 22 2020, 7:59AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Manual nesting offals
- Replies: 1
- Views: 4797
Re: Manual nesting offals
Tommy,
I can get it to do it as well with my settings. I'll pass it along to the software engineers to have a look at. Thanks for the heads up.
-Clint-
I can get it to do it as well with my settings. I'll pass it along to the software engineers to have a look at. Thanks for the heads up.
-Clint-
- Wed, Apr 22 2020, 7:53AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Control nesting loaded material board sizing
- Replies: 2
- Views: 5505
Re: Control nesting loaded material board sizing
Mark,
I see the same thing here. I'll pass the issue on to the software engineers.
-Clint-
I see the same thing here. I'll pass the issue on to the software engineers.
-Clint-
- Wed, Apr 22 2020, 7:51AM
- Forum: Thermwood 3-Axis Machinery
- Topic: material list ordering in maneal panel input
- Replies: 2
- Views: 5749
Re: material list ordering in maneal panel input
I'll put the request in for the software engineers. Thanks for the suggestion.
-Clint-
-Clint-
- Wed, Apr 22 2020, 7:48AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Sheet Yield affected by voids
- Replies: 1
- Views: 4534
Re: Sheet Yield affected by voids
Tommy,
I see the same thing here, I'll pass it along to the software engineers. Thank you.
-Clint-
I see the same thing here, I'll pass it along to the software engineers. Thank you.
-Clint-
- Wed, Apr 22 2020, 7:40AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Program Timer Idea
- Replies: 3
- Views: 6128
Re: Program Timer Idea
Tommy,
There is not, it is always calculated at 100%.
-Clint-
There is not, it is always calculated at 100%.
-Clint-
- Fri, Apr 17 2020, 2:36PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Program Timer Idea
- Replies: 3
- Views: 6128
Re: Program Timer Idea
Tommy, I assume you are currently using the Program Time Estimator to get the expected run time. Provided you are able to use that, and are on Control Nesting version 6.12 or higher, in Print Settings, at the bottom check the box for CNC Nest Report. That will give you the information your are looki...
- Mon, Apr 13 2020, 3:48PM
- Forum: eCabinet Systems Software
- Topic: Adjustable Shelf Holes
- Replies: 2
- Views: 4797
Re: Adjustable Shelf Holes
Chris, Make sure if you are using Groups in Control Nesting that the 5mm tool is set up in that Group. You may be expecting it in a specific Group, but it is actually in another without that tool. If you are on verision 6.12 or newer in Control Nesting, with that material nested, you should be able ...
- Wed, Apr 08 2020, 12:01PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Bottom of parts chipping
- Replies: 4
- Views: 7725
Re: Bottom of parts chipping
I'd guess that short ramp length is giving you some issues. Lengthen it out like Dave suggests and see what that does for you.
-Clint-
-Clint-