Planter box
Posted: Tue, Mar 17 2015, 9:35PM
It is spring time and I made a couple planter boxes for my wife out of solid cedar
Using ecabinets and constraint manager, the box is set up so it can be resized.
for the pegs to hold it together I use some of the scrap 1/4" x 1/4" and about 1" each.
let me know if you have any problems with it so I can adjust my thinking
Tim
Using ecabinets and constraint manager, the box is set up so it can be resized.
for the pegs to hold it together I use some of the scrap 1/4" x 1/4" and about 1" each.
let me know if you have any problems with it so I can adjust my thinking
Tim