Problem loading cabs after design share cd install

Place to discuss only the "Design Sharing" aspects of the eCabinet Systems software.

Moderators: Jason Susnjara, Clint Buechlein

Post Reply
Cheri Michael
New Member
Posts: 1
Joined: Fri, May 18 2007, 6:23PM
Location: Siloam Springs, AR

Problem loading cabs after design share cd install

Post by Cheri Michael »

I had a problem loading cabinets after installing a design share cd. Tech support had me uninstall and reinstall (the cabs from the cd). I've done that and now have the following happening:

In Detail Room, I've selected the wall and right click and select Chose Item. I click on the cabinet (doesn't seem to matter which one) and get the following messages:

Unable to open ECabinets file data.
Click ok and get: There was a problem loading the cabinet.
Click ok and get: There was a problem reading HSF for cabinet load in ROOM.

Since tech support is closed for the night, I thought I'd see if anyone here had suggestions.

Thanks in advance!
Cheri
Walker T Scott

Post by Walker T Scott »

Cheri

Did you ever get this resolved? What version of eCabinets are your running?

Walker
Post Reply