32mm library

Place to discuss only the "Design Sharing" aspects of the eCabinet Systems software.

Moderators: Jason Susnjara, Clint Buechlein

Post Reply
Glenn Eddy
New Member
Posts: 3
Joined: Tue, Oct 16 2007, 8:12AM

32mm library

Post by Glenn Eddy »

Is there a 32mm library available for sale? I've looked at the info from Doug Gilford's sys 32 metric and am not sure if it would fill our needs. I would actually need to open a cabinet and look at the construction. Any help would be appreciated.
John Vickerman
New Member
Posts: 9
Joined: Thu, Sep 01 2005, 7:01PM

Re: 32mm library

Post by John Vickerman »

You could go into Blums web site, they have complete drawings for the 32 mm system, they used to have "pearls" i beleive, but hat is no longer around. If you can not find it contact Blums tech line and they could direct you.
If you forward your e-mail address to me I will take a look for it and send it off, just do not have the time at this moment.

I am always amazed that there are a lot of people looking but few responding, your post is from October, today is 12/30, WOW.

Have a good day!

JV
Jay Davidson
New Member
Posts: 9
Joined: Fri, Feb 29 2008, 11:24AM
Company Name: Davidson Industries INC
Contact:

Re: 32mm library

Post by Jay Davidson »

If you are still looking Thermwood has one for free: http://www.ecabinetsystems.com/ecabinet ... raries.htm

Just dig through there, free anything is better than nothing!
Post Reply