Door on Wall Cabinet

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

User avatar
Gary Puckett
Wizard Member
Posts: 1324
Joined: Mon, May 19 2008, 1:39PM
Company Name: The Woodworkery
Location: Saint Charles, Missouri
Contact:

Door on Wall Cabinet

Postby Gary Puckett » Mon, Oct 26 2009, 2:19PM

If anyone will still talk to me :joker: How do you put a door on a frameless wall cabinet with a slant front? The front of the sides are 45 degrees to the front of the slant face.

Gary
Attachments
wall cab.jpg
wall cab.jpg (71.81 KiB) Viewed 950 times
HP Pavilion
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT

Jon Kenworthy
Junior Member
Posts: 43
Joined: Thu, Mar 27 2008, 6:00PM
Company Name: darrells Carpenter Shop
Location: Marana, AZ

Re: Door on Wall Cabinet

Postby Jon Kenworthy » Mon, Oct 26 2009, 3:42PM

We use CAD software to determine the size of the door needed then set the hinge side and open side reveals so the door is the correct size. We normally use the hinge mount holes but I haven't been able to figure out how to get these to end up at the correct location so for this type of cabinet we use a jig to place the hinge mount holes after the cabinet is put together. We use the Blum 45 deg angle hinges which sets the door out from the cabinet so the from the front you have the correct reveal to the next door, then on the open side we use a thicker bumper than normal to get approximately the same spacing from the cabinet to the back of the door. I attached a couple of pictures to show the process we go through.
Drawing for Corner Cabinet.JPG
Drawing for Corner Cabinet.JPG (13.16 KiB) Viewed 937 times
Attachments
Angle Front Cabinet Top View.jpg
Angle Front Cabinet Top View.jpg (21.61 KiB) Viewed 937 times

Wally Schneeberger
Guru Member
Posts: 473
Joined: Tue, May 17 2005, 1:55PM

Re: Door on Wall Cabinet

Postby Wally Schneeberger » Mon, Oct 26 2009, 8:43PM

Gary Puckett wrote:If anyone will still talk to me :joker: How do you put a door on a frameless wall cabinet with a slant front? The front of the sides are 45 degrees to the front of the slant face.

Gary

If this is a 24" x 24" corner cab x 12" deep -- I find that a 16" door gives the clearances needed to butt to the next cab and still open. You can set your reveals to make this happen.
Image

User avatar
Gary Puckett
Wizard Member
Posts: 1324
Joined: Mon, May 19 2008, 1:39PM
Company Name: The Woodworkery
Location: Saint Charles, Missouri
Contact:

Re: Door on Wall Cabinet

Postby Gary Puckett » Tue, Oct 27 2009, 6:18AM

Thanks Guys,

I have no experience with a frameless corner cabinet. I have no idea on how to draw this so I will just show it as a corner open shelf unit.

Gary
HP Pavilion
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT

Darren Harvey
Junior Member
Posts: 68
Joined: Fri, Jun 23 2006, 9:01AM
Location: palm harbor, fl

Re: Door on Wall Cabinet

Postby Darren Harvey » Tue, Oct 27 2009, 8:43AM

gary here is a couple of wall corner cabinets we've done. i forget the specification but look around. hope it helps some what. darren
Attachments
wall corner L.hsf
(290.02 KiB) Downloaded 57 times
wall corner R.hsf
(270.02 KiB) Downloaded 52 times

User avatar
Gary Puckett
Wizard Member
Posts: 1324
Joined: Mon, May 19 2008, 1:39PM
Company Name: The Woodworkery
Location: Saint Charles, Missouri
Contact:

Re: Door on Wall Cabinet

Postby Gary Puckett » Tue, Oct 27 2009, 8:58AM

Thanks Darren,


I will take a look.
HP Pavilion
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT

Joe Harkin
Senior Member
Posts: 115
Joined: Wed, Oct 11 2006, 2:14PM
Location: w. CT

Re: Door on Wall Cabinet

Postby Joe Harkin » Tue, Oct 27 2009, 2:49PM

Darren, do you have the jpeg's to go with those hsf files ?

Darren Harvey
Junior Member
Posts: 68
Joined: Fri, Jun 23 2006, 9:01AM
Location: palm harbor, fl

Re: Door on Wall Cabinet

Postby Darren Harvey » Tue, Oct 27 2009, 3:32PM

joe, here are the jpegs. darren
Attachments
wall corner R.jpg
wall corner R.jpg (11.29 KiB) Viewed 902 times
wall corner L.jpg
wall corner L.jpg (12.51 KiB) Viewed 902 times


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Baidu [Spider] and 5 guests