hardware holes in corner cab

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Jim Carter
Junior Member
Posts: 61
Joined: Mon, Nov 30 2009, 3:51PM
Company Name: Jim Carter Corp.

hardware holes in corner cab

Post by Jim Carter »

Hello
Can some one tell me why the holes for the hinge mounting plate are not applied to the corner cabinet side?
Thanks
Jim
Attachments
corner angled front.hsf
(576.02 KiB) Downloaded 238 times
jim@jimcartercorp.com
973-224-0221
Ringwood, New Jersey
Nat Wheatley
eCabinets Beta Tester
Posts: 491
Joined: Wed, Apr 15 2009, 8:22PM
Company Name: Plymouth Custom Closets
Country: UNITED STATES
Location: Plympton, MA

Re: hardware holes in corner cab

Post by Nat Wheatley »

Jim,

Increasing the depth of the holes should get them to show up on your cabinet. You'll have to play around with the entered depth to get the actual dilled depth that you're looking for. Once the holes do show up, the depth shown in the ecabinets nest diagrams should be the depth that you end up when you do drill them.

For one of my angled cabinets, I had to enter a drill depth of 18.96mm to get the holes to display, and drill at 9.5mm.
http://www.plymouthcustomclosets.com

Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Jim Carter
Junior Member
Posts: 61
Joined: Mon, Nov 30 2009, 3:51PM
Company Name: Jim Carter Corp.

Re: hardware holes in corner cab

Post by Jim Carter »

Thank you Nat:
I did it as you said.
JIm
jim@jimcartercorp.com
973-224-0221
Ringwood, New Jersey
Post Reply