LDE Problem
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Senior Member
- Posts: 222
- Joined: Sun, Dec 11 2005, 1:22PM
- Location: Kennedale, Texas
- Contact:
LDE Problem
When I print my drawings from LDE most of the lines are gone. This is after the V6 update. However I can now save as a jpg and not get the nasty dialog boxes anymore. But that may be from upgrading the graphics card and adding another 512mb of ram. Either way its better.
Lamar Horton
http://www.jlcustomcabinets.com
http://www.jlcustomcabinets.com
-
- Thermwood Team
- Posts: 586
- Joined: Tue, Jul 14 2009, 11:05AM
- Company Name: Thermwood Corporation
- Country: UNITED STATES
- Location: Thermwood
- Contact:
Re: LDE Problem
Lamar,
The nasty dialog boxes in the JPG have been fixed in V6, so that is not the graphics card. That issue I think was more related to Vista than anything else.
As for your lines not printing, does this happen in the Print Preview as well? Can you post a screen shot from the print preview showing exactly what you are seeing?
I have created simple LDE prints and of course, they work fine. Feel free to attach a small sample job if necessary.
The nasty dialog boxes in the JPG have been fixed in V6, so that is not the graphics card. That issue I think was more related to Vista than anything else.
As for your lines not printing, does this happen in the Print Preview as well? Can you post a screen shot from the print preview showing exactly what you are seeing?
I have created simple LDE prints and of course, they work fine. Feel free to attach a small sample job if necessary.
Ryan Callahan
Thermwood
Dell Precision T3400 / Core 2 Quad Q9400 / 2.4GHz / 8GB RAM / 256MB NVIDIA Quadro FX3450 / Windows 7 x64
Thermwood
Dell Precision T3400 / Core 2 Quad Q9400 / 2.4GHz / 8GB RAM / 256MB NVIDIA Quadro FX3450 / Windows 7 x64
-
- Guru Member
- Posts: 559
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: LDE Problem
Ryan,
I have a client with the same issue. Here are two images of the kitchen: One a screen shot of what it should look like, the other of the print preview (which is exactly what is printed).
I have a client with the same issue. Here are two images of the kitchen: One a screen shot of what it should look like, the other of the print preview (which is exactly what is printed).
- Attachments
-
- Lost Lines and Details.zip
- Before preview/print... 2 images
- (97.95 KiB) Downloaded 295 times
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: LDE Problem
Brad,
What is your line enhancement setting?
jnr
What is your line enhancement setting?
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
-
- New Member
- Posts: 4
- Joined: Tue, Oct 06 2009, 10:02AM
- Company Name: Kitchen Creations Inc
- Location: Fredeicton, New Brunswick
Re: LDE Problem
I have the same problem and I run on Windows XP Proffessional. I can't seem to print any LDE that are good enough.
Also my system is really slow since I put it on... it has a 5 sec delay between moving the mouse and the graphics moving when I zoom or rotate ect. Didn't have that with the previous version.
Also my system is really slow since I put it on... it has a 5 sec delay between moving the mouse and the graphics moving when I zoom or rotate ect. Didn't have that with the previous version.
- Attachments
-
- Once it goes to print preview or print it looks like this..png (50.11 KiB) Viewed 10113 times
-
- Before I print it looks like this.png (82.12 KiB) Viewed 10113 times
-
- Guru Member
- Posts: 559
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: LDE Problem
Josh,
The LINE ENHANCEMENT setting was actually Shana's (see above). I believe she had it set to 3.
The LINE ENHANCEMENT setting was actually Shana's (see above). I believe she had it set to 3.
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: LDE Problem
I've been happy with line enhancement at 3 but have mistakenly changed it in the past and have had similar results to what you are all experiencing. Just a thought.
Once v6 does print properly for you, you may notice significant improvements to the printing resolution. I used to print to a page size that was enormous then shrink it down with a PDF creator software to fake it out to a better resolution but that is no longer necessary for me. So far so good here....
jnr
Once v6 does print properly for you, you may notice significant improvements to the printing resolution. I used to print to a page size that was enormous then shrink it down with a PDF creator software to fake it out to a better resolution but that is no longer necessary for me. So far so good here....
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
-
- Senior Member
- Posts: 222
- Joined: Sun, Dec 11 2005, 1:22PM
- Location: Kennedale, Texas
- Contact:
Re: LDE Problem
It's the same problem as Shana's. Here is the job.
They do not show up in the print preview or after printing to PDF writer.
They do not show up in the print preview or after printing to PDF writer.
- Attachments
-
- Miliara 002.esj
- (5.13 MiB) Downloaded 291 times
Lamar Horton
http://www.jlcustomcabinets.com
http://www.jlcustomcabinets.com
-
- New Member
- Posts: 4
- Joined: Mon, Nov 21 2005, 12:16AM
- Location: ramona ca.
Re: LDE Problem
Lot's of imorvment but some cabinet lines and show up for a second in preveiw but then disappear any help appreciate.
-
- Wizard Member
- Posts: 4722
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: LDE Problem
I am also having trouble with missing lines on LDE printouts
Tried adjusting line weight with no positive results.
Kerry
Tried adjusting line weight with no positive results.
Kerry
-
- New Member
- Posts: 6
- Joined: Thu, Jan 14 2010, 4:22PM
- Company Name: woodys
Re: LDE Problem
I am also having some serious problems with the new line drawing editor related to printing. Sometimes when I go to print preview I get a preview but everything is black except my arrows and then all the other time I don't even get a preview? Not sure if there is some new setting I can't find or what? I will attach the program file I seem to be having trouble with!
- Attachments
-
- homeshow vanityV^.zip
- (3.64 MiB) Downloaded 284 times
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: LDE Problem
[quote="Lamar Horton"]When I print my drawings from LDE most of the lines are gone. quote]
This has been listed and fixed in the next update.
This has been listed and fixed in the next update.
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- Senior Member
- Posts: 222
- Joined: Sun, Dec 11 2005, 1:22PM
- Location: Kennedale, Texas
- Contact: