Cannot edit cabinets

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Jon Dieterlen
Junior Member
Posts: 77
Joined: Thu, May 19 2005, 11:24PM

Cannot edit cabinets

Postby Jon Dieterlen » Sun, Feb 14 2010, 8:15AM

I am not able to edit the cabinets in the attached job. The resize in the room lay out doesn't work, and if you take them to the CE you cannot change the size or construction settings.

I tried deleting a cabinet and placing it again. I could then edit the cabinet. I have been having problems with this in V6. Hopefully these issues will be resolved shortly.

One of the major problems that has been addressed elsewhere in this forum, is the loading of the cabinets in the pick window to the right. This takes up RAM.

I only have 1GB ram, I hope to upgrade soon in the form a new Dell laptop. It is such a hassle getting a new computer!

I also found that the wood components (turnings etc.) hogs the memory. After placing turnings, I need to save and restart the software so it is not so sluggish.

Any ideas?

Jon
Attachments
Kitchen1.esj
(2.62 MiB) Downloaded 76 times

User avatar
Michael RA Greschuk
Senior Member
Posts: 109
Joined: Mon, Jun 20 2005, 9:00PM
Location: Calgary Alberta

Re: Cannot edit cabinets

Postby Michael RA Greschuk » Sun, Feb 14 2010, 4:06PM

Hello Jon,
I took your cabinets into the ce and rightclicked on it and chose to remove part editer cuts. I was able to resize your cabinet then even though there was no pe cuts on it as far as i could tell. It might help you as a work around for now. Hope it helps
Mike

Jon Dieterlen
Junior Member
Posts: 77
Joined: Thu, May 19 2005, 11:24PM

Re: Cannot edit cabinets

Postby Jon Dieterlen » Sun, Feb 14 2010, 10:20PM

Thanks Mike. I ended up deleting and replacing the cabinets before I read your reply. This was certainly some glitch.

After replacing the cabinets with identical replacements, they could be edited.

Thanks again!

Jon


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 15 guests