Can't get rid of hardware
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Can't get rid of hardware
I'm working on a cabinet and I've set all my hinge, hinge plate and drawer slide default hardware successfully. I seem to be running into a problem of deleting a Hinge: Blum: BL-38N3580.08 from the cabinet buy list no matter what I try and do. The other hardware is being done correctly. I just can't get rid of the pesky Hinge: Blum: BL-38N3580.08.
How do I get rid of this?
How do I get rid of this?
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 586
- Joined: Tue, Jul 14 2009, 11:05AM
- Company Name: Thermwood Corporation
- Country: UNITED STATES
- Location: Thermwood
- Contact:
Re: Can't get rid of hardware
Donald,
The software will not allow you to delete an item that is associated to the cabinet. To do this, you must delete the association first, and then the part should clear from the Cabinet Buy List.
So, to do this, simply go to Hinges on the Item Window. If you know what part the hinge is associated to, then select that part, otherwise, you can select the entire cabinet. Now, in the Item window near the top, you will see what looks like 2 pieces of paper (Apply To/Clear...). Click this with the mouse, and select the appropriate option.
This should remove the hinge from your list.
Hope this helps.
The software will not allow you to delete an item that is associated to the cabinet. To do this, you must delete the association first, and then the part should clear from the Cabinet Buy List.
So, to do this, simply go to Hinges on the Item Window. If you know what part the hinge is associated to, then select that part, otherwise, you can select the entire cabinet. Now, in the Item window near the top, you will see what looks like 2 pieces of paper (Apply To/Clear...). Click this with the mouse, and select the appropriate option.
This should remove the hinge from your list.
Hope this helps.
Ryan Callahan
Thermwood
Dell Precision T3400 / Core 2 Quad Q9400 / 2.4GHz / 8GB RAM / 256MB NVIDIA Quadro FX3450 / Windows 7 x64
Thermwood
Dell Precision T3400 / Core 2 Quad Q9400 / 2.4GHz / 8GB RAM / 256MB NVIDIA Quadro FX3450 / Windows 7 x64
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Can't get rid of hardware
Thank you Ryan. I have noticed that about half the time I do that process the program crashes and Windows shuts it down.
The other half of the time it works. So I just make sure I've saved my project prior to doing this operation.
The other half of the time it works. So I just make sure I've saved my project prior to doing this operation.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 586
- Joined: Tue, Jul 14 2009, 11:05AM
- Company Name: Thermwood Corporation
- Country: UNITED STATES
- Location: Thermwood
- Contact:
Re: Can't get rid of hardware
Don,
If you can find a job that it happens to every time, send it my way and with luck, it will happen to me as well. This way we can find a way to fix it for everyone.
If you can find a job that it happens to every time, send it my way and with luck, it will happen to me as well. This way we can find a way to fix it for everyone.
Ryan Callahan
Thermwood
Dell Precision T3400 / Core 2 Quad Q9400 / 2.4GHz / 8GB RAM / 256MB NVIDIA Quadro FX3450 / Windows 7 x64
Thermwood
Dell Precision T3400 / Core 2 Quad Q9400 / 2.4GHz / 8GB RAM / 256MB NVIDIA Quadro FX3450 / Windows 7 x64
-
- Junior Member
- Posts: 75
- Joined: Tue, Feb 16 2010, 2:39PM
- Company Name: Sean Jakob Cabinets
Re: Can't get rid of hardware
Ryan
I had a similar problem
I have associated a shelf support to a cabinet (or the shelf I can't remember)
How the heck can I delete it? I can understand the hinge issue of Donald's, but how do I delete a random piece of hardware especially if I can't remember how or to which part I added it.
The GUI really should allow for a user to simply delete it at the Cabinet List window and jobs done.
Sean
I had a similar problem
I have associated a shelf support to a cabinet (or the shelf I can't remember)
How the heck can I delete it? I can understand the hinge issue of Donald's, but how do I delete a random piece of hardware especially if I can't remember how or to which part I added it.
The GUI really should allow for a user to simply delete it at the Cabinet List window and jobs done.
Sean
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: Can't get rid of hardware
Sean, hi-lite the cabinet first, then you can adjust the quantity of hardware in the Buy list.
-
- Junior Member
- Posts: 75
- Joined: Tue, Feb 16 2010, 2:39PM
- Company Name: Sean Jakob Cabinets
Re: Can't get rid of hardware
Ryan
Yes, I had already tried that. But when I save the cabinet, they keep coming back again. Any other ideas?
Yes, I had already tried that. But when I save the cabinet, they keep coming back again. Any other ideas?
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Can't get rid of hardware
Sean,
If your hardware was added as part of another operation like hinges and mounts that are added with a door or slides and mounts that were added with a drawer front or box you will not be able to delete them from the cabinet buy list. Any other hardware can be deleted by highlighting the appropriate cabinet (by double clicking it) and then entering a 0 in the quantity added to cabinet box and hitting Enter.
The Items that cannot be deleted in this way will be showing in the Quantity of Applied Defaults column and not the Quantity Added to Cabinet Column in the Buy List. These Items must be removed in their appropriate editors.
If this doesn't work post one of the offennding cabinets so we can look at it.
Kerry
If your hardware was added as part of another operation like hinges and mounts that are added with a door or slides and mounts that were added with a drawer front or box you will not be able to delete them from the cabinet buy list. Any other hardware can be deleted by highlighting the appropriate cabinet (by double clicking it) and then entering a 0 in the quantity added to cabinet box and hitting Enter.
The Items that cannot be deleted in this way will be showing in the Quantity of Applied Defaults column and not the Quantity Added to Cabinet Column in the Buy List. These Items must be removed in their appropriate editors.
If this doesn't work post one of the offennding cabinets so we can look at it.
Kerry
-
- Thermwood Team
- Posts: 586
- Joined: Tue, Jul 14 2009, 11:05AM
- Company Name: Thermwood Corporation
- Country: UNITED STATES
- Location: Thermwood
- Contact:
Re: Can't get rid of hardware
Sean,
It could be that the parts are being added as part of the assembly as well. Saving the cabinet does not alter the assembly defaults. Just a thought.
As Ketty mentioned, still having problems, post the job and we can see what is what.
It could be that the parts are being added as part of the assembly as well. Saving the cabinet does not alter the assembly defaults. Just a thought.
As Ketty mentioned, still having problems, post the job and we can see what is what.
Ryan Callahan
Thermwood
Dell Precision T3400 / Core 2 Quad Q9400 / 2.4GHz / 8GB RAM / 256MB NVIDIA Quadro FX3450 / Windows 7 x64
Thermwood
Dell Precision T3400 / Core 2 Quad Q9400 / 2.4GHz / 8GB RAM / 256MB NVIDIA Quadro FX3450 / Windows 7 x64
-
- Junior Member
- Posts: 75
- Joined: Tue, Feb 16 2010, 2:39PM
- Company Name: Sean Jakob Cabinets
Re: Can't get rid of hardware
Rick, Ryan & Kerry
Thank you so much for taking time to respond to my post.
I feel like an absolute Dill.
Tried again today, and it did work.
Maybe it was just one of those things, but most likely it was probably me.
Thank you again and sorry to have wasted your collective time.
Thank you so much for taking time to respond to my post.
I feel like an absolute Dill.
I said that I had tried that and I swear that I had and it didn't work.Sean, hi-lite the cabinet first, then you can adjust the quantity of hardware in the Buy list.
Tried again today, and it did work.
Maybe it was just one of those things, but most likely it was probably me.
Thank you again and sorry to have wasted your collective time.