clipped corner cabinet

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Ray Jorgensen
Senior Member
Posts: 199
Joined: Sat, Jul 29 2006, 9:11AM
Company Name: Classic Custom Wood
Location: NC Iowa
Contact:

clipped corner cabinet

Postby Ray Jorgensen » Thu, May 13 2010, 12:23PM

Does anyone have a clipped corner cabinet that they would like to share? I'm having a little problem getting my head around how to do these.

Thanks

JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: clipped corner cabinet

Postby JohnLashuay » Thu, May 13 2010, 1:44PM

Ray, is this what you are looking for?
Attachments
base_corner_angle_24x34.5 - 36x36.jpg
base_corner_angle_24x34.5 - 36x36.jpg (9.7 KiB) Viewed 3760 times
base_corner_angle_24x34.5 - 36x36.hsf
(566.02 KiB) Downloaded 92 times
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43

Ray Jorgensen
Senior Member
Posts: 199
Joined: Sat, Jul 29 2006, 9:11AM
Company Name: Classic Custom Wood
Location: NC Iowa
Contact:

Re: clipped corner cabinet

Postby Ray Jorgensen » Thu, May 13 2010, 2:26PM

Thanks John I should have used a better description. I need to angle "clip" the front corner of a base cab on the end of a run. It will be clipped on the right hand side. Hope that is clearer.

Kenneth Rychlik
Senior Member
Posts: 161
Joined: Thu, May 04 2006, 11:09AM
Location: Southwest Houston
Contact:

Re: clipped corner cabinet

Postby Kenneth Rychlik » Thu, May 13 2010, 6:23PM

Is this getting closer?

Kenneth
Attachments
Corner Base Diagonal.jpg
Corner Base Diagonal.jpg (10.92 KiB) Viewed 3739 times
Corner Base Diagonal.hsf
(474.02 KiB) Downloaded 103 times

Ray Jorgensen
Senior Member
Posts: 199
Joined: Sat, Jul 29 2006, 9:11AM
Company Name: Classic Custom Wood
Location: NC Iowa
Contact:

Re: clipped corner cabinet

Postby Ray Jorgensen » Fri, May 14 2010, 6:26AM

Nope Kenneth, I need a 20" wide 24" deep base with the right side measuring 20".. Now clip the corner at a 45. That corner will be a "finished" piece with the door to the left of that. If I keep at this maybe I'll make myself clear!!! Thanks

Dennis Englert

Re: clipped corner cabinet

Postby Dennis Englert » Fri, May 14 2010, 7:28AM

Ray,
On the 20" side, use a 4" inset on the front to adjust. Chamfer the corner of that part 45 degrees with the Part Editor. You might also restrict it with the Constraint Manager. Install a door, but increase the reveal on the chamferred corner to adjust for the placment of the door. A display panel or display board would have to be manually placed on the chamfered corner and associated with the cabinet to save it.

If this is a face frame cabinet, then you'll need to play with negative scribes on the chamfered corner. There's a little more math, but all doable.


Dennis

Dennis Englert

Re: clipped corner cabinet

Postby Dennis Englert » Fri, May 14 2010, 7:29AM

Correction: Chamfer the corner of the top, deck and any shelves, not the end panel.

Sorry about that.

Dennis

User avatar
Gary Puckett
Wizard Member
Posts: 1324
Joined: Mon, May 19 2008, 1:39PM
Company Name: The Woodworkery
Location: Saint Charles, Missouri
Contact:

Re: clipped corner cabinet

Postby Gary Puckett » Fri, May 14 2010, 7:32AM

Ray,

Can you draw a overhead view of the cabinet to show us.

Gary
HP Pavilion
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT

JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: clipped corner cabinet

Postby JohnLashuay » Fri, May 14 2010, 8:45AM

How about this one? It is a corner cabinet that would need more modification.

-John
Attachments
Base_20_Front-Rt-Clip.jpg
Base_20_Front-Rt-Clip.jpg (9.62 KiB) Viewed 3704 times
Base_20_Front-Rt-Clip.hsf
(160.02 KiB) Downloaded 104 times
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43

Ray Jorgensen
Senior Member
Posts: 199
Joined: Sat, Jul 29 2006, 9:11AM
Company Name: Classic Custom Wood
Location: NC Iowa
Contact:

Re: clipped corner cabinet

Postby Ray Jorgensen » Fri, May 14 2010, 9:08AM

John,

That's what I was looking for!!!! From there I can see how you did it a proceed. Thanks

Dan Calvert
New Member
Posts: 19
Joined: Tue, May 09 2006, 1:43AM
Company Name: Calvert Custom Cabinetry
Location: Hale, MO
Contact:

Re: clipped corner cabinet

Postby Dan Calvert » Fri, May 14 2010, 10:14AM

Ray,

Here is another style of clip corner cabinet.
Attachments
Clipped Corner Top View.jpg
Clipped Corner Top View.jpg (12.29 KiB) Viewed 3616 times
Clip Corner Cabinet.jpg
Clip Corner Cabinet.jpg (23.24 KiB) Viewed 3616 times

User avatar
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: clipped corner cabinet

Postby George Davidson » Fri, May 14 2010, 12:50PM

This is all you get on Friday Ray :lol:
It is 3 Cabinets
Attachments
Test 5-14-10.esj
(790.02 KiB) Downloaded 106 times
Test 5-14-10_2.jpg
Test 5-14-10_2.jpg (86.25 KiB) Viewed 3605 times
Test 5-14-10.jpg
Test 5-14-10.jpg (42.33 KiB) Viewed 3605 times


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 8 guests