V6.4 download & 5.2 extension

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Steve Detina
Junior Member
Posts: 74
Joined: Wed, Jul 20 2005, 7:29AM
Company Name: Silhouette Custom Cabinets
Country: CANADA
Location: Hamilton, Ontario

V6.4 download & 5.2 extension

Postby Steve Detina » Fri, May 28 2010, 8:24AM

I have been trying to download the latest version of ecab and it hangs in the middle of the download each time. Has anyone else had this problem.

I am currently running 6.3 on one laptop for testing and some production work but the majority of my production work still is coming from V5.2. I also have a number of jobs that I have started in 5.2 and will be completeing shortly but not before 5.2 expires. Is there going to be a another extension for 5.2, this would minimize any possible production problems until I complete my transition to 6.4.

As for my transition to 6.3 instead of trying to just copy all of my cabinets over I have just recreated them in the new version, I takes a while because my lib has literally thousands of cabinets. Have there been any issues when you just copy the lib from 5.2 to 6.3.

Buy the way the new version of ecab looks great and works really good. The boys and girls at thermwood put a lot of effort into it and it shows. Thanks guys. :beer: :beer:

User avatar
Georgi Baltov
Guru Member
Posts: 341
Joined: Sat, Mar 10 2007, 7:31PM
Company Name: Top Notch Cabinets
Country: CANADA
Location: Oakville, Ontario
Contact:

Re: V6.4 download & 5.2 extension

Postby Georgi Baltov » Fri, May 28 2010, 9:13AM

Steve,

there has not been issues with migrating cabinets and jobs from V5 to V6. I have tried it on pretty big and complex jobs and they got cut the same way as with V5. It's really your call. Sooner or later you are going to have to move to V6 as we have. Currently V6.4 is pretty stable and I think that the only thing that might need work is speed in custom layout. Everything else works pretty good.

Regarding time extension I can't help you there.

Let me know if you still can't download the file and I will send you a different link. All I need is your e-mail address.

Steve Detina
Junior Member
Posts: 74
Joined: Wed, Jul 20 2005, 7:29AM
Company Name: Silhouette Custom Cabinets
Country: CANADA
Location: Hamilton, Ontario

Re: V6.4 download & 5.2 extension

Postby Steve Detina » Fri, May 28 2010, 12:12PM

Thanks for the reply. I have tried again and it still stalls about half way through. So if you can send me another link that would be great. My email is steved@silhouettecustomcabinets.com.

User avatar
Georgi Baltov
Guru Member
Posts: 341
Joined: Sat, Mar 10 2007, 7:31PM
Company Name: Top Notch Cabinets
Country: CANADA
Location: Oakville, Ontario
Contact:

Re: V6.4 download & 5.2 extension

Postby Georgi Baltov » Mon, May 31 2010, 8:17AM

Hi Steve,

I am sending the file right now. You will receive an e-mail with attached link. Use it to download then extract and install. I hope you have WinRar or similar. If not just download one that recognizes .rar extension.


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 13 guests