Interesting shelf editor picture
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Interesting shelf editor picture
When trying to add/edit shelves in a corner cabinet I keep getting this interesting rendering. Any ideas? I've attached the cabinet file also.
- Attachments
-
- Corner cabinet shelf editor 589x800.jpg (18.61 KiB) Viewed 4509 times
-
- Cabinet with shelf problems.hsf
- (402.02 KiB) Downloaded 314 times
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Junior Member
- Posts: 30
- Joined: Wed, Jun 04 2008, 5:00AM
Re: Interesting shelf editor picture
I have had a similar thing happen too .
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Re: Interesting shelf editor picture
Don,
Any chance that cabinet was created in Ver. 5? I had issues, in one way or another, with just about every cabinet I tried to bring into version 6. I chased some of the issues, but for the most part had more success deleting the cabinets and re-building from scratch.
Naturally, disregard this if you created this cabinet in Ver. 6.
Nat
Any chance that cabinet was created in Ver. 5? I had issues, in one way or another, with just about every cabinet I tried to bring into version 6. I chased some of the issues, but for the most part had more success deleting the cabinets and re-building from scratch.
Naturally, disregard this if you created this cabinet in Ver. 6.
Nat
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Interesting shelf editor picture
Nat,
Thanks for the response. The cabinet is actually one of the seed cabinets I built from scratch in V6. I was going to use it in a design and needed to resize it and that's where all the interesting results start happening. I chucked the cabinet I was working on, brought the seed in again, resized it to what I wanted and life was good. No more problems. Go figure.....
Thanks for the response. The cabinet is actually one of the seed cabinets I built from scratch in V6. I was going to use it in a design and needed to resize it and that's where all the interesting results start happening. I chucked the cabinet I was working on, brought the seed in again, resized it to what I wanted and life was good. No more problems. Go figure.....
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Interesting shelf editor picture
I had something like this happen years ago with version 4 I think it was. I cleared the Cabinet Editor workspace and was left with the target looking somewhat like a really busy atom (http://www.thermwood.com/forums/viewtop ... f=3&t=4058). I think my problem back then was related to old video drivers or not enough video memory...something like that but it went away.