Cabinet Divider

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Steven E Shmucker
New Member
Posts: 5
Joined: Fri, Aug 06 2010, 8:47AM
Company Name: Cedars

Cabinet Divider

Post by Steven E Shmucker »

Hi everyone. we are new to E-cab and are going to have a string of simple questions. We designed a simple carcass and at the moment we need to install a divider/partitioner down the middle parallel to the sides with dados in the top and deck. Hopefully we will learn answers to other hold ups having the question answered. Thanks much
JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: Cabinet Divider

Post by JohnLashuay »

Steven,

Take your cabinet to the Shelf/Partition editor

go to the construction settings (click button or right-click -> construction settings)

Partition Tab -> Top & Bottom settings change to Blind dado -> ok

highlight the opening, then click "add partition"

Have you used the video tutorials? I think this process is shown there.

Hope this helps!
-John
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43
Donald Thomson
Guru Member
Posts: 833
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Cabinet Divider

Post by Donald Thomson »

Steven,

Welcome to eCabs. It's a powerful piece of software supported by a great group of folks here.

I would recommend signing up for the video training that Thermwood has made available. It goes in to all these details about how to build cabinets and more. You can also get the training manual "Almost Complete Guide to eCabinets" from Thermwood and this covers even more detail. They are two excellent training resources that will get you up and running very quickly.
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Post Reply