Wierd happenings

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Gene Kimmi
Senior Member
Posts: 106
Joined: Sun, May 07 2006, 9:24PM
Location: Huron, KS
Contact:

Wierd happenings

Postby Gene Kimmi » Wed, Aug 25 2010, 3:49PM

I have been having some wierd things happening since updating to version 6, but this is definitely odd. I took a cabinet to the line drawing editor to dimension, and when I came back to the room layout, this is what I had.
Attachments
JOB 2.jpg
JOB 2.jpg (16.91 KiB) Viewed 695 times
JOB.jpg
JOB.jpg (22.83 KiB) Viewed 695 times
Gene Kimmi
Lenovo W540 windows 8.1 Pro
Intel Core i-7 4800MQ @ 2.7GHz 8 GB ram
Intel HD & NVIDIA Quadro K2100M Graphics
Samsung 256 SSD Drive

Rick Deskins
Thermwood Team
Posts: 828
Joined: Tue, May 17 2005, 12:47PM
Company Name: Thermwood
Country: UNITED STATES
Location: Thermwood

Re: Wierd happenings

Postby Rick Deskins » Wed, Aug 25 2010, 3:57PM

Can you zip up and post the job file that you are having problems? Please give exact steps that you took to get this?

ex.
1. load job
2. Select Cabinet X and Click LDE
3. Return to Room
4. Get large crazy pull geometry in Room
...
etc.
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900

Gene Kimmi
Senior Member
Posts: 106
Joined: Sun, May 07 2006, 9:24PM
Location: Huron, KS
Contact:

Re: Wierd happenings

Postby Gene Kimmi » Wed, Aug 25 2010, 4:15PM

RIck,

I have tried to upload the job, but it must be too big (7.02MB) even after zipping it. I can email it to you in the morning and post here the steps I took if that works for you.
Gene Kimmi
Lenovo W540 windows 8.1 Pro
Intel Core i-7 4800MQ @ 2.7GHz 8 GB ram
Intel HD & NVIDIA Quadro K2100M Graphics
Samsung 256 SSD Drive

Gene Kimmi
Senior Member
Posts: 106
Joined: Sun, May 07 2006, 9:24PM
Location: Huron, KS
Contact:

Re: Wierd happenings

Postby Gene Kimmi » Thu, Aug 26 2010, 2:51PM

Here is the 2nd job this has happened with. I followed the same process to get this.
1. Load job
2. Choose cabinet
3. Take it to the LDE
4. Hide all doors, drawer fronts, back and toe kick
5. Dimension cabinet and add notes
6. Add table
7. Print
8. Return to the custom layout
Attachments
Wierd Job 2.jpg
Wierd Job 2.jpg (14.48 KiB) Viewed 648 times
Gene Kimmi
Lenovo W540 windows 8.1 Pro
Intel Core i-7 4800MQ @ 2.7GHz 8 GB ram
Intel HD & NVIDIA Quadro K2100M Graphics
Samsung 256 SSD Drive


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 10 guests