Line drawing editor glitches
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 77
- Joined: Mon, Jan 11 2010, 11:49PM
- Company Name: Nienow Woodwork
- Location: Pewaukee, WI
Line drawing editor glitches
I'm having trouble zooming in on a wall or cabinet in the line drawing editor, I just upgraded to B5, is anyone else having any issues with this?
-
- Guru Member
- Posts: 828
- Joined: Fri, Jun 17 2005, 12:23AM
- Location: South Africa
Re: Line drawing editor glitches
Good so I am not the only one
-
- Wizard Member
- Posts: 4718
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Line drawing editor glitches
Absolutely no problems here. The LDE is working better than it ever has.
Are you using the shift key and both mouse buttons to zoom or ctrl key and dragging a box?
Both ways are working great for me.
Are you using the shift key and both mouse buttons to zoom or ctrl key and dragging a box?
Both ways are working great for me.
-
- Guru Member
- Posts: 828
- Joined: Fri, Jun 17 2005, 12:23AM
- Location: South Africa
Re: Line drawing editor glitches
Yup Kerry! Used to work, not any more.
-
- Wizard Member
- Posts: 4718
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Line drawing editor glitches
Nick,
I would try the usual fixes first.(Update graphics card drivers) I am downloading new drivers for mine as we speak.
I would try the usual fixes first.(Update graphics card drivers) I am downloading new drivers for mine as we speak.
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Line drawing editor glitches
I know this is a dumb question but, do you have the wall/cabinet selected before trying to zoom? It works fine for me.
-
- Junior Member
- Posts: 77
- Joined: Mon, Jan 11 2010, 11:49PM
- Company Name: Nienow Woodwork
- Location: Pewaukee, WI
Re: Line drawing editor glitches
I have done everything I have in the past, hoding down the shift key & such. I can move left & right, up& down but cant pull it forward or back. I can move the page forward, but not the individual wall or cabinet.
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: Line drawing editor glitches
What is your selection mode in the LDE?
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- Junior Member
- Posts: 77
- Joined: Mon, Jan 11 2010, 11:49PM
- Company Name: Nienow Woodwork
- Location: Pewaukee, WI
Re: Line drawing editor glitches
Oh yeah, I did recently did upgrade to an Invidia Quadro FX580, really improved performance in all aspects, everything worked great until I added Build 5, so far the only problem I have is zooming in on an item, making it pretty hard to create line drawings.
-
- Guru Member
- Posts: 828
- Joined: Fri, Jun 17 2005, 12:23AM
- Location: South Africa
Re: Line drawing editor glitches
Done that Kerry, driver is up to date. Like Tom performance is up but zooming and rotating in the LDE is suddenly gone
-
- Wizard Member
- Posts: 4718
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Line drawing editor glitches
Tom,
Make sure your Quadro FX580 is running the latest device drivers from Nvidia. Even if you bought the card today it could have old drivers on the install disk.
If you are trying to zoom a wall make sure you click the Select Wall Mode then mouse over the wall and select it (it will turn green
Make sure you do not have the Note button or pointer button selected.
If you are using a smart mouse make sure it has the latest drivers installed.
You might post your operating system info.
Make sure your Quadro FX580 is running the latest device drivers from Nvidia. Even if you bought the card today it could have old drivers on the install disk.
If you are trying to zoom a wall make sure you click the Select Wall Mode then mouse over the wall and select it (it will turn green
Make sure you do not have the Note button or pointer button selected.
If you are using a smart mouse make sure it has the latest drivers installed.
You might post your operating system info.
-
- Junior Member
- Posts: 77
- Joined: Mon, Jan 11 2010, 11:49PM
- Company Name: Nienow Woodwork
- Location: Pewaukee, WI
Re: Line drawing editor glitches
Kerry, my system info: Windows XP
Pro Vers. 2002
Service pack 3
Intel duo processor
E7300@2.66 GHz
#Gig Ram
Nvidia Qudro FX580 updated
I have been selecting wall, it turns green, I can move it from side to side, up and down, as soon as I press the left and right buttons on the mouse the wall is no longer green
Pro Vers. 2002
Service pack 3
Intel duo processor
E7300@2.66 GHz
#Gig Ram
Nvidia Qudro FX580 updated
I have been selecting wall, it turns green, I can move it from side to side, up and down, as soon as I press the left and right buttons on the mouse the wall is no longer green
-
- Wizard Member
- Posts: 4718
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Line drawing editor glitches
Tom,
Maybe Rick will have some more ideas. It sounds like (for some reason)the shift key isn't working and pushing the left mouse button is de-selecting the wall. I am using XP with Service pack 3 and the LDE is working great.
Sorry I couldn't help.
Kerry
Maybe Rick will have some more ideas. It sounds like (for some reason)the shift key isn't working and pushing the left mouse button is de-selecting the wall. I am using XP with Service pack 3 and the LDE is working great.
Sorry I couldn't help.
Kerry
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Line drawing editor glitches
Tom,
Try this and let me know what happens:
> Select the wall (turns green)
> Press and keep the Shift key depressed and left click on the wall a few times (shift key is down the whole time): Does the wall stay green??
> Try the same with the right mouse button, then both buttons (shift key held down the whole time): Does the wall stay green??
Try this and let me know what happens:
> Select the wall (turns green)
> Press and keep the Shift key depressed and left click on the wall a few times (shift key is down the whole time): Does the wall stay green??
> Try the same with the right mouse button, then both buttons (shift key held down the whole time): Does the wall stay green??
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Junior Member
- Posts: 77
- Joined: Mon, Jan 11 2010, 11:49PM
- Company Name: Nienow Woodwork
- Location: Pewaukee, WI
Re: Line drawing editor glitches
Scott, left clicking the mouse the wall goes back &forth from green. Now I just tried selecting a cabinet & when I do that when I right & left click I am able to pull the full wall forward or back, not the selected cabinet, which I guess works fine for now