Tom,
After you select the cabinet or wall and it turns green are you holding the shift key on your keyboard down while you press both mouse buttons and try to zoom?
Line drawing editor glitches
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Kerry Fullington
- Wizard Member
- Posts: 4722
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
-
Tom Nienow
- Junior Member
- Posts: 77
- Joined: Mon, Jan 11 2010, 11:49PM
- Company Name: Nienow Woodwork
- Location: Pewaukee, WI
Re: Line drawing editor glitches
Absolutely Kerry
-
Scott G Vaal
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Line drawing editor glitches
Tom,
Are you sure you are not in NOTE or LEADER mode?? I can sorta reproduce what you are speaking about but only if I am in NOTE or LEADER modes. Physically click on one of the other dimension modes (such as Horizontal or Vertical Dimensioning) and see if the problem goes away.
Are you sure you are not in NOTE or LEADER mode?? I can sorta reproduce what you are speaking about but only if I am in NOTE or LEADER modes. Physically click on one of the other dimension modes (such as Horizontal or Vertical Dimensioning) and see if the problem goes away.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
Tom Nienow
- Junior Member
- Posts: 77
- Joined: Mon, Jan 11 2010, 11:49PM
- Company Name: Nienow Woodwork
- Location: Pewaukee, WI
Re: Line drawing editor glitches
Positively, I've done this application for years with no problems, but now it seems by selecting any part or cabinet I'm able to zoom in the wall. Don't know what caused the change except for the upgrade to B5