Is it possible to pocket drill in Ecab

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Is it possible to pocket drill in Ecab

Postby JohnLashuay » Wed, Nov 10 2010, 8:28AM

Does any one know if it is possible to create a 2" ramp-in in order to pocket screw? If so, how?

Thanks in advance!
-John
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43

JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: Is it possible to pocket drill in Ecab

Postby JohnLashuay » Wed, Nov 10 2010, 4:23PM

Should I take the sound of crickets as a no...? I realize that this can be done through the g-code but was looking for an Ecab way.
-John
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43

User avatar
Scott G Vaal
Thermwood Team
Posts: 1741
Joined: Tue, May 17 2005, 12:44PM
Company Name: Thermwood Corporation
Location: Thermwood Corp: Dale, Indiana
Contact:

Re: Is it possible to pocket drill in Ecab

Postby Scott G Vaal » Wed, Nov 10 2010, 4:33PM

John,

Sorry for the sound of crickets... No, there is not a direct way via eCabSys to do this.
Regards,

Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000

JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: Is it possible to pocket drill in Ecab

Postby JohnLashuay » Wed, Nov 10 2010, 4:38PM

No worries Scott! :)
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43

Gary Campbell
Guru Member
Posts: 256
Joined: Sat, Apr 04 2009, 6:27PM
Company Name: ShopBot Tools Inc
Country: UNITED STATES
Location: Durham NC

Re: Is it possible to pocket drill in Ecab

Postby Gary Campbell » Wed, Nov 10 2010, 7:58PM

John...
I use a rectanglar rafix pattern for screw pockets. Works great, but doesnt have the sloped bottom.
Gary Campbell
ShopBot Tools Production Support

ShopBot (eCabinets) Link Training & Support


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Bing [Bot] and 10 guests