Hi - this is a recurring "issue" - I use the quotes because I'm not sure if it's an issue or just my problem. When cutting doorways into walls, if the "build direction" of that wall has been reversed, the cutout always appears flipped. Meaning, if I try to cut into the left side of the wall inside the room, it shows up on the right side (as if it was cut on the left side of the wall from OUTSIDE the room).
I know this may just be a case of me remembering that the wall has been built opposite to the regular direction, but I'm wondering if there's a fix for this?
Thanks - Jason
Cutouts in walls on wrong side
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 533
- Joined: Thu, Jun 23 2005, 12:26AM
- Location: San Francisco
Cutouts in walls on wrong side
Applebox Cabinetry and Furniture
www.appleboxwood.com
www.appleboxwood.com
-
- Wizard Member
- Posts: 4722
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Cutouts in walls on wrong side
Jason,
In Edit Wall View we should be looking at the side of the wall the black line is on but it looks like you are correct. It cuts on the wrong side.
In Edit Wall View we should be looking at the side of the wall the black line is on but it looks like you are correct. It cuts on the wrong side.