Ecab deleting cabinets from job
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- New Member
- Posts: 3
- Joined: Tue, Nov 30 2010, 6:20PM
- Company Name: Kensington Cabinets
- Location: Sechelt
- Contact:
Ecab deleting cabinets from job
After nest my job and sending to the CNC router, several cabinets disappeared. When I try to add them back they just replace other existing cabinets instead of making a new cabinet at the end of the list. I've tried restarting several times and starting new files. Same thing every time. Anyone have any suggestions?
Thanks,
Aaron
Thanks,
Aaron
-
- Senior Member
- Posts: 249
- Joined: Wed, Dec 10 2008, 3:29PM
- Company Name: Eastcoast Ultimate
- Country: AUSTRALIA
- Contact:
Re: Ecab deleting cabinets from job
I too have had this happen to me. Also ,yesterday, ecabs locked up on me whilst putting a shelf in a cabinet. After restarting, it had deleted all cabinets from the job and left only panels.
Core i7-2600 @ 3.70Ghz - 8 GB ram - Win 7 Ultimate 64bit - 2 x 24" ASUS monitors - Nvidia 600 Quadro 1GB graphics
www.eastcoastultimate.com.au
www.eastcoastultimate.com.au
-
- New Member
- Posts: 3
- Joined: Tue, Nov 30 2010, 6:20PM
- Company Name: Kensington Cabinets
- Location: Sechelt
- Contact:
Re: Ecab deleting cabinets from job
some more details on the error.
The issue occurs on ecabinet only. As the system is finishing exporting the .twd file the screen flashes blank (as it normally does) but when it appears all of the upper cabinets are missing. I’ve tried using upper cabinets from difference seeds and get the same result. I’ve saved the file under multiple names prior to exporting to .twd file and all the upper are deleted from all files after the export. The .twd file itself seems fine. I can see all the cabinets are there, the problem is only on ecabinets and does not effect control nest. I had made no changes or updates to ecabinets. There were background windows updates however. Currently running windows professional xp.
The issue occurs on ecabinet only. As the system is finishing exporting the .twd file the screen flashes blank (as it normally does) but when it appears all of the upper cabinets are missing. I’ve tried using upper cabinets from difference seeds and get the same result. I’ve saved the file under multiple names prior to exporting to .twd file and all the upper are deleted from all files after the export. The .twd file itself seems fine. I can see all the cabinets are there, the problem is only on ecabinets and does not effect control nest. I had made no changes or updates to ecabinets. There were background windows updates however. Currently running windows professional xp.
-
- New Member
- Posts: 1
- Joined: Sat, Feb 12 2011, 11:32AM
- Company Name: portes PaJo s.e.n.c.
Re: Ecab deleting cabinets from job
J'ai le même problème... Y-a-t-il quelqu'un chez Thermwood pour résoudre le problème?
Merci de répondre...
Jocelyne L.
www.porrtespajo.com
Merci de répondre...
Jocelyne L.
www.porrtespajo.com
Re: Ecab deleting cabinets from job
Hi,
I don't speak French, Jocelyne, but maybe if you try saving and restarting the program more often that will help.
Bev
I don't speak French, Jocelyne, but maybe if you try saving and restarting the program more often that will help.
Bev
BJB
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Ecab deleting cabinets from job
It says "I have the same problem... Y-a-t-il someone at Thermwood to solve the problem?" I have no idea what "Y-a-t-il " means.
Jean-Gabriel, where are you???
Jean-Gabriel, where are you???
-
- eCabinets Beta Tester
- Posts: 1236
- Joined: Mon, May 30 2005, 2:26PM
- Location: Anderson SC.
- Contact:
Re: Ecab deleting cabinets from job
Dan it sounds a little like "yall tell". Maybe they are southern french.
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Ecab deleting cabinets from job
You might have something there. LOLForrest Chapman wrote:Dan it sounds a little like "yall tell". Maybe they are southern french.
-
- Guru Member
- Posts: 559
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: Ecab deleting cabinets from job
Gentlemen,
You almost have it...
We could chalk it up to "a Canada thing", but Jason Galbraith appears to hail from Australia.
Any suggests or input from a Thermwood representative?
Thanks in advance,
You almost have it...
Jocelyne is a CNC Automation client (has a couple of 53s and uses Panelmetrix along with eCabinet Systems). Aaron is also a CNC Automation client from British Columbia.I have the same problem... Is there someone at Thermwood that can solve the problem?
We could chalk it up to "a Canada thing", but Jason Galbraith appears to hail from Australia.
Any suggests or input from a Thermwood representative?
Thanks in advance,
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Ecab deleting cabinets from job
Hmmm...sounds like your problem then Brad.Brad McIntosh wrote:...Jocelyne is a CNC Automation...