I added a off fall sheet in to the ShopBot Link and I'm not sure the results are what they are supposed to be. I've got all my settings in the Link set to use X=0, Y=0 as the origin. As you can see in the attached photo, the sheet I added for this job didn't cut at 0,0. For some reason it cut on the other side of the sheet. This cutting operation involved a do flip operation first.
0,0 is the lower right corner of the picture.
Any ideas?
Adding a sheet in ShopBot Link
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Adding a sheet in ShopBot Link
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Guru Member
- Posts: 256
- Joined: Sat, Apr 04 2009, 6:27PM
- Company Name: ShopBot Tools Inc
- Country: UNITED STATES
- Location: Durham NC
Re: Adding a sheet in ShopBot Link
Don...
Added sheets first point is in the upper right corner (max X,max Y) and proceeds CCW when entering individual points. Rectangles are added similarly. I have not noticed any differences in how this works, actually right from the beginning. Did the nest show the parts cut in that location? Did the flip side machine correctly?
Added sheets first point is in the upper right corner (max X,max Y) and proceeds CCW when entering individual points. Rectangles are added similarly. I have not noticed any differences in how this works, actually right from the beginning. Did the nest show the parts cut in that location? Did the flip side machine correctly?
Gary Campbell
ShopBot Tools Production Support
ShopBot (eCabinets) Link Training & Support
ShopBot Tools Production Support
ShopBot (eCabinets) Link Training & Support
-
- Wizard Member
- Posts: 4722
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Adding a sheet in ShopBot Link
Don,
What location do you have set in the link nesting parameters for off-fall and added sheets?
What location do you have set in the link nesting parameters for off-fall and added sheets?