Every time I try the EB I get errors or parts of my cab goes missing. Here is what I just got on a corner cab--
Anyone know how to fix this problem??? TIA
Edge Banding
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Edge Banding
Wally,
In the Cabinet Editor double click to select the cabinet
Right Click and choose Remove Part Editor Cuts/From Entire Cabinet
(You will lose any part editor cuts you have made)
Let the cabinet re generate and try the edgbanding again.
In the Cabinet Editor double click to select the cabinet
Right Click and choose Remove Part Editor Cuts/From Entire Cabinet
(You will lose any part editor cuts you have made)
Let the cabinet re generate and try the edgbanding again.
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Edge Banding
My experience has been that adding edge banding to "wall cabinets" causes the cabinet to lose it properties. I have spoken with Scott about this and I believe it will be fixed in the next release.
-John
-John
-
- Guru Member
- Posts: 477
- Joined: Tue, May 17 2005, 1:55PM
Re: Edge Banding
Thanks Kerry -- Yes that did work but it seems my Ecabs is acting a little weird lately. It's been a while since I used it and now it is giving me all kinds of errors.Kerry Fullington wrote:Wally,
In the Cabinet Editor double click to select the cabinet
Right Click and choose Remove Part Editor Cuts/From Entire Cabinet
(You will lose any part editor cuts you have made)
Let the cabinet re generate and try the edgbanding again.