I'm a new user to ECabinet, so my learning curve is steep right now.
One thing I'm looking for help on is associating a drilling pattern with a Cabinet Pull. I envision it working like door hinges, or drawer guides.
Is there a way to do this? I've searched back through the blog, and it looks like the feature has been discussed but it has to be done manually and have contraints added for each door or drawer front I do.
Thanks in Advance
Cabinet Handles and Machining Patterns
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- New Member
- Posts: 4
- Joined: Tue, Aug 23 2011, 6:44AM
- Company Name: D and D Millwork
- Country: UNITED STATES
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: Cabinet Handles and Machining Patterns
Michael,
You would need to use part editor geometry and constrain each one. If you start from a seed cabinet and add the holes for a door pull, that will stay constrained, but the problem is if you decide you need to change the door at some point, then the part editor work you did will be lost.
Hope this helps,
jnr
You would need to use part editor geometry and constrain each one. If you start from a seed cabinet and add the holes for a door pull, that will stay constrained, but the problem is if you decide you need to change the door at some point, then the part editor work you did will be lost.
Hope this helps,
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570