can I USE .dwg files in ecabs?
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
can I USE .dwg files in ecabs?
I just nailed down a huge job, and I am hoping to be able to use .dwg files in ecabs to expedite the room layouts. is this possible?
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: can I USE .dwg files in ecabs?
Sorry Kyle,
You will need to draw them room layouts in eCabinets then populate them with cabinets.
You will need to draw them room layouts in eCabinets then populate them with cabinets.
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
Re: can I USE .dwg files in ecabs?
My work around for that is I would trun your DWG or floor plan in to a STL.
Open your custom layout I put one wall in the layout at_0,0 Then put the STL in the layout.
Open your custom layout I put one wall in the layout at_0,0 Then put the STL in the layout.
-
- Senior Member
- Posts: 204
- Joined: Thu, Oct 20 2011, 12:52PM
- Company Name: Carlton Kitchen and Bath
- Country: UNITED STATES
Re: can I USE .dwg files in ecabs?
Cool trick; did anyone ever figure out how to solve the missing lines while printing from LDE? Is there any specific printer/ driver combo that doesn't produce this problem? It would also be nice if drawings from LDE could be exported as dxf files; it would make producing/ editing shop drawings a little easier.George Davidson wrote:My work around for that is I would turn your DWG or floor plan in to a STL.
Open your custom layout I put one wall in the layout at_0,0 Then put the STL in the layout.
-
- Guru Member
- Posts: 477
- Joined: Tue, May 17 2005, 1:55PM
Re: can I USE .dwg files in ecabs?
If you have a nice clear screen while in LDE then just do a Print Screen and paste to Irfanview and print it any size or do corrections before printing. You can also change it to B & W or grayscale. FWIW .