Hi,
I can't put a crown molding properly on an angled front cabinet. The molding doesn't follow the angle, it goes straight. I mean angled cabinet, when the left or right end has an inset, and the top and deck follows this inset (angle part).
So what is the solution?
Crown molding for angled front cabinet
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 477
- Joined: Tue, May 17 2005, 1:55PM
Re: Crown molding for angled front cabinet
Put it on your corner cabinet first in the Cabinet Editor.
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Crown molding for angled front cabinet
Greg,
For a cabinet like this
You will need to go to the Moldings Tab in the Item Window and create the correct length molding with the proper cuts on each end and place it manually. Don't forget to associate the molding to the cabinet before you save the cabinet or the molding won't be saved
For a cabinet like this
You will need to go to the Moldings Tab in the Item Window and create the correct length molding with the proper cuts on each end and place it manually. Don't forget to associate the molding to the cabinet before you save the cabinet or the molding won't be saved