1. Open a std frameless (tall, base or upper) in the CE
2. Take it to the D/DE
3. add a hole pattern for the hinge
4. add 2 door pairs to a single opening
5. go back to CE
6. the top door is missing the hinge holes
-John
Double Door/ Single Opening - No Hinge on Top
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Double Door/ Single Opening - No Hinge on Top
John,
Sorry, but I am not able to reproduce this. Just so I am not missing a step, here are mine:
1.) Load the std base frameless
2.) Go to door/drawer editor
3.) Set a hinge pattern
4.) Select opening and add double doors, on the add double door dialog I choose Qty. 2, then select OK
5.) Return to main and explode cab: All hinge pattern cuts seem to be there for me.
Am I missing something? If not, maybe I need your hinge pattern.
Sorry, but I am not able to reproduce this. Just so I am not missing a step, here are mine:
1.) Load the std base frameless
2.) Go to door/drawer editor
3.) Set a hinge pattern
4.) Select opening and add double doors, on the add double door dialog I choose Qty. 2, then select OK
5.) Return to main and explode cab: All hinge pattern cuts seem to be there for me.
Am I missing something? If not, maybe I need your hinge pattern.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Double Door/ Single Opening - No Hinge on Top
Hi Scott, those steps are correct. Here is a cabinet that has the hole pattern and the problem
Thanks,
-John
Thanks,
-John
- Attachments
-
- Master.hsf
- (558.02 KiB) Downloaded 276 times