Door desighner question

[Scott Marshburn]

Is there any way to create a display door in door designer without the edge banding?

[Rick Deskins]

You can create a slab door with 0 thickness edgebanding that is the same color as the sheet stock if you need to make pe cuts on the display door. If you do not need pe cuts, then you can use an mdf door.

[Scott Marshburn]

Thanks Rick Four reply:
But I tried that and the Attached pix and hsf file is what I get.I guess what I am asking Is would it be possible to have a selection for no edge banding just as in the edge banding editor

[Rick Deskins]

For a case like this, you should use a display panel. Then use the user part name feature to label the display panel as a door.

[Kerry Fullington]

Scott,

Use an MDF door created using your material of choice and then de-select any tooling under the tools tab. This will make a slab door without edge banding.

[Kerry Fullington]

Sorry, I didn't read close enough. Rick had already suggested this.

[Scott Marshburn]

Thanks Rick that is what I will have to do but this method will not allow me to have the door actually on the cabinet without making it an assembly. I was hoping to avoid that by using a display door instead as all of the doors and drawer fronts for this job are made like the one I posted. Also any hardware holes will have to be placed manually .I could live with the visual deal but that does not look good for a presentation. Also how would the machine react?Maby the option to remove edg banding from display doors could be added?

[Scott Marshburn]

Sorry guys I posted the last before actually giving it a try the display panel method will work without saving as an assembly but I will still have to apply any hardware holes manually