Can't Find a feature

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Georgi Baltov
Guru Member
Posts: 341
Joined: Sat, Mar 10 2007, 7:31PM
Company Name: Top Notch Cabinets
Country: CANADA
Location: Oakville, Ontario
Contact:

Can't Find a feature

Post by Georgi Baltov »

In the new release there's an option "Allow drawer box construction to drawer front when drawer box front does not exist". I can't find that one. Where is it?
Georgi Baltov
Guru Member
Posts: 341
Joined: Sat, Mar 10 2007, 7:31PM
Company Name: Top Notch Cabinets
Country: CANADA
Location: Oakville, Ontario
Contact:

Re: Can't Find a feature

Post by Georgi Baltov »

I found out something but it doesn't seem to work completely. I made the bottom blind dado into the drawer front but I can't do it with the sides.

In my drawer box designer I remove the drawer box front and set the bottom to blind dado into the front. I set the same for the left and right sides. When I click OK I can see the blind dado appear on the bottom but no change on the sides so when I add a drawer in a cabinet the blind dado only shows on the bottom of the drawer front. Can someone check this on and let me know if it works.

Thanks
Georgi Baltov
Guru Member
Posts: 341
Joined: Sat, Mar 10 2007, 7:31PM
Company Name: Top Notch Cabinets
Country: CANADA
Location: Oakville, Ontario
Contact:

Re: Can't Find a feature

Post by Georgi Baltov »

I can definitely use this feature. I managed to make eCabinets to show the blind dado construction on the sides as well but when the drawer is added the blind dado is still only present on the bottom of the box attaching to the drawer front. There must be a bug or something in here.

I am actually really excited about that feature.

Nice addition Thermwood.
Rick Deskins
Thermwood Team
Posts: 857
Joined: Tue, May 17 2005, 12:47PM
Company Name: Thermwood
Country: UNITED STATES
Location: Thermwood

Re: Can't Find a feature

Post by Rick Deskins »

Change you flush setting for the sides. Then your box should show the blind dado for the sides and bottom.
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
Post Reply