Door Drawer Editor

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Steve Detina
Junior Member
Posts: 74
Joined: Wed, Jul 20 2005, 7:29AM
Company Name: Silhouette Custom Cabinets
Country: CANADA
Location: Hamilton, Ontario

Door Drawer Editor

Postby Steve Detina » Thu, Jan 31 2013, 11:56AM

In the past you would be able to add two different size doors for the same cabinet in the door and drawer editor.

You may ask why. I used this feature to create blind corner cabinets.

For instance I would add the left door what ever it may be as far as style and size which would be the working door, I
would increase the offset on the right side to leave a opening for the overlay. Then I would add the right door as a
slab door in the material that the cabinet exterior was finished in and set the offset for the right side to accomidate my
working door. I would change a few of the offsets so that it was a true overlay.

Now when I try to do this the software only allows me to add one door and would leave the opening where I would add
the overlay. It does not allow me to add a second door. I did not notice this as I have standard blind corner cabinets
but I had to change one this morning and that is when I noticed the issue.

When I try to open these cabinets for editing eCab crashes.

If I place a partition in there it would mess up my adjustable shelf.

Can something be done about this?

thanks in advance.

Steve
Attachments
Blind Left 2D.jpg
Blind Left 2D.jpg (17.63 KiB) Viewed 791 times
Blind Left 2D.hsf
(460.02 KiB) Downloaded 55 times
Wall Blind Left RHD.jpg
Wall Blind Left RHD.jpg (18.02 KiB) Viewed 791 times
Wall Blind Left RHD.hsf
(426.02 KiB) Downloaded 60 times

User avatar
Scott G Vaal
Thermwood Team
Posts: 1741
Joined: Tue, May 17 2005, 12:44PM
Company Name: Thermwood Corporation
Location: Thermwood Corp: Dale, Indiana
Contact:

Re: Door Drawer Editor

Postby Scott G Vaal » Thu, Jan 31 2013, 12:13PM

Steve,

Each of the attached cabinets have partitions in them and all seems to work fine for me. To the best of my knowledge, eCabSys has never allowed you to add more than 1 door side by side in a single opening (other than a double door). Do you have some older versions you can attach that you believe had the added doors without the partition divider? Are these the cabinets that crash for you?
Regards,

Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000

Steve Detina
Junior Member
Posts: 74
Joined: Wed, Jul 20 2005, 7:29AM
Company Name: Silhouette Custom Cabinets
Country: CANADA
Location: Hamilton, Ontario

Re: Door Drawer Editor

Postby Steve Detina » Fri, Feb 01 2013, 8:49AM

Scott,

You are right, I was having a brain fart. :wall:

Need more coffee.

Thanks for the response.

User avatar
Scott G Vaal
Thermwood Team
Posts: 1741
Joined: Tue, May 17 2005, 12:44PM
Company Name: Thermwood Corporation
Location: Thermwood Corp: Dale, Indiana
Contact:

Re: Door Drawer Editor

Postby Scott G Vaal » Fri, Feb 01 2013, 9:07AM

No worries, happens to the best of us!
Regards,

Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Yahoo [Bot] and 12 guests