raise the deck

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Chris B Campbell
Junior Member
Posts: 84
Joined: Fri, Jul 29 2005, 4:00PM
Location: Helendale, CA.

raise the deck

Postby Chris B Campbell » Fri, Feb 22 2013, 7:41PM

hey All,
I have some cabinets that are using inset doors, the customer would like for the 3/4" deck to be 1/4" above the 2" bottom rail so the door will have a stop. I thought it would be a simple change to the decks bottom inset of 1.25" to 1.5" but that does not work. Any Ideas?
AAAAAAAAAAAAGH! NVER MIND "DECK FLOAT" DUHHHHH!
Thanks,
Chris

Leo Graywacz
Guru Member
Posts: 572
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Re: raise the deck

Postby Leo Graywacz » Wed, Feb 27 2013, 12:54AM

Yes, deck float set to -.25"
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
256 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 11 guests